Table of Contents
Advertisement
5.0 System Resource
Figure 2: Signal of WWAN Module for UTMS Channels.
3. TEST Procedure
Power-up the EUT until it has completed its boot up process. Place the EUT in building
and check the UMTS/HSDPA signal intensity. Connect to Internet through UMTS/HSDPA
channel. Check the link speed if bandwidth is 7.2Mbps. Download a 10Mbytes test file
from Internet. Record the results from the link states. Make sure it has no any error
while downloading.
Figure 3: Link Speed of WWAN Module for UMTS/HSDPA Channels.
User's Manual
Page 5-9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VBOX-3200 and is the answer not in the manual?