Updating Applications On The Bootware Menu - H3C S12500 Installation Instructions Manual

Updating Applications on the BootWare Menu

Never hot-plug the CF card after you enter the BootWare menu.
A CF card can be used only after the cover of the CF card is installed.
Entering the BootWare Menu
After powering on the switch, run BootWare program first and the terminal will display the following
information:
DDR2 SDRAM test successful.
System is starting...
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing
Done!
**************************************************************************
*
*
*
**************************************************************************
Copyright (c) 2004-2008 Hangzhou H3C Technologies Co., Ltd.
Compiled Date
CPU Type
CPU L1 Cache
CPU L2 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
cfa0 Size
NVRAM Size
BASIC CPLD Version
EXTEND CPLD Version : 001B
PCB Version
Board self testing...........................
Board steady testing...
Board SlotNo...
Subcard exist testing...
DX246 testing...
H3C S12500 BootWare, Version 1.00
: May 20 2008
: MPC8548E
: 32KB
: 512KB
: 1000MHz
: DDR2 SDRAM
: 1024MB
: 400MHz
: 4MB
: 128MB
: 247MB
: 1024KB
: 001B
: Ver.A
5-8
[ PASS ]
[ 1 ]
[ FAIL ]
[ PASS ]
*
*
*