H3C S12500 Installation Instructions Manual page 105

Content
MN-B-C-D-R/T
Example of the label
Figure B-11 shows the label on the optical fiber between two devices:
Figure B-11 Example of the label on the optical fiber between two devices
"A01-01-05-05-R" indicates that the local end of the optical fiber is connected with Optical Receiving
Interface 05 on Slot 5, Frame 01 in the cabinet on Row A, Column 01 in the machine room.
"G01-01-01-01-T" indicates that the opposite end of the optical fiber is connected with Optical
Transmitting Interface 01 on Slot 01, Frame 01 in the cabinet on Row G, Column 01 in the machine
room
Labels for the Fiber that Connects the Device and the ODF
Meaning of the label
Table B-4 shows the information on both sides of the labels affixed to the optical fiber that connects the
device and the ODF.
Table B-4 Information on labels affixed to the fiber between the device and the ODF
Content
MN-B-C-D-R/T
Meaning
MN: cabinet number
B: frame number
C: physical slot number
D: optical interface number
R: optical receiving interface
T: optical transmitting interface
Meaning
MN: cabinet number
B: frame number
C: physical slot number
D: optical interface number
R: optical receiving interface
T: optical transmitting interface
B-10
Example
The meanings are the same as above.
When the local device and the opposite end
device are not in the same machine room,
MN can be the name of the machine room.
—
Example
For example, A01
Numbered in bottom-up order with two
digits, for example, 01
Numbered in top-down and left-right order
with two digits, for example, 01.
Numbered in top-down and left-right order
with two digits, for example, 05
—