H3C S12500 Installation Instructions Manual page 73

Routing switches
Hide thumbs Also See for S12500:
Table of Contents

Advertisement

Step1 Loosen the captive screws on the air filter and pull the air filter out gently.
Step2 Wash the air filter using clean water without taking off the black mesh. Take care not to rub the air filter
during cleaning and then install it back after drying the air filter.
Figure 5-3 Remove the air filter of an S12508
(1) Air filter
Installing the air filter
Step1 Hold the air filter by two edges and position it closely to the right place.
Step2 Fasten the captive screws on the air filter.
Figure 5-4 Install the air filter of an S12508
(1) Lower fan tray
(3) Front panel
Replacing the air filter of an S12518
Removing and cleaning the air filter
Step1 Loosen the captive screws on the air filter and pull the air filter out gently.
Step2 Wash the air filter using clean water without taking off the black mesh. Take care not to rub the air filter
during cleaning and then install it back after drying the air filter.
(2) Front panel
(2) Air filter
5-3

Advertisement

Table of Contents
loading

Table of Contents