H3C S12500 Installation Instructions Manual page 94

Figure A-4 Cable fixing example
(1) (1)(2) (1) (1)(2)
(1) Flat washer
When using a hard power cord, fix it near its terminal so as to free the terminal and the cable from
stress;
Do not use tapping screws to fasten the connecting terminals;
The power cords of the same type and in the same direction should be bound together and kept
neatly and straight;
The following table lists the requirements in the binding with cable ties.
Table A-1 Tie-binding parameters
Cable bundle diameter (mm)
10
10 to 30
30
No cable or bundle can tie a knot;
The metal parts of the crimped cold-pressed terminal blocks (such as air switch) cannot stretch
beyond the blocks.
(3) (3)
(2) Spring washer
A-3
(3) Nut
Space between bundles (mm)
80 to 150
150 to 200
200 to 300