H3C S12500 Installation Instructions Manual page 83

TFTP update procedure
Step1 Connect the switch to a PC where the desired file is located via the management Ethernet port. In this
case, you should know the IP address of the PC. At the same time, connect the switch to an external PC,
which can be the same one that contains the desired file, via the console port.
Step2 Run the TFTP Server program on the PC connected to the management Ethernet port, and specify the
path for updating the application files.
Step3 Run the terminal emulation program on the PC connected to the console port, and boot the switch to
access the BootWare menu.
Step4 Select 3 in the BootWare menu. Press Enter and the system will access the Ethernet submenu.
==========================<Enter Ethernet SubMenu>=========================
|Note:the operating device is cfa0
|<1> Download Application Program To SDRAM And Run
|<2> Update Main Application File
|<3> Update Backup Application File
|<4> Update Secure Application File
|<5> Update User Private File
|<6> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
==========================================================================
Enter your choice(0-6):6
Step5 Enter 6 in the Ethernet submenu to modify the Ethernet interface parameters. The system displays:
==========================<ETHERNET PARAMETER SET>=========================
|Note: '.' = Clear field.
| '-' = Go to previous field.
| Ctrl+D = Quit.
==========================================================================
Shortcut key . is used to clear the current input; shortcut key - is used to return to the previous field.
Shortcut key Ctrl+D is used to quit the parameter setting page.
Protocol (FTP or TFTP) :TFTP
Load File Name
Target File Name
Server IP Address
Local IP Address
Gateway IP Address
Step6 After you provide the required information, the system accesses the Ethernet interface submenu again:
==========================<Enter Ethernet SubMenu>=========================
:bootware
:test.bin
:bootware
:test.bin
:192.168.1.1
:192.168.1.253
:0.0.0.0
5-13
|
|
|
|
|
|
|
|
|
|
|
|