Verifying Installation - H3C S12500 Installation Instructions Manual

The following section gives a brief description of the installation procedures. For details, refer to the
installation instruction.
Step1 Place the switch on the support tray and slide the switch along the slide rails until the mounting brackets
on the switch reach the rack posts.
Step2 Use mounting screws to fix the mounting brackets to the rack posts, as shown in Figure 3-3.
Figure 3-3 Install the switch in a standard 19-inch cabinet

Verifying Installation

After installing the switch, check the installation against the following checklist. Ensure that all check
results are positive.
Table 3-1 Installation checklist
The mounting brackets are firmly fixed onto the switch.
The switch is installed in the right position.
The mounting brackets on the switch are firmly fixed with the
rack.
Item
3-3
Result
Remarks
Yes No