Using The Basic-Bootware Menu; Accessing The Basic-Bootware Menu - H3C SECPATH 5080F-CMW710-R9628P2414 Release Notes

Shortcut
keys
Ctrl+D
Ctrl+E
Ctrl+F
Ctrl+T
Ctrl+U
Ctrl+Z

Using the BASIC-BOOTWARE menu

Accessing the BASIC-BOOTWARE menu

7. Power on the device.
8. Press Ctrl+D within 4 seconds after the "Press Ctrl+D to access BASIC-BOOTWARE MENU"
prompt message appears. If you fail to do this within the time limit, the system starts to run the
extended BootWare segment.
======================<BASIC-BOOTWARE MENU(Ver 1.19)>=======================
|<1> Modify Serial Interface Parameter
|<2> Update Extended BootWare
|<3> Update Full BootWare
|<4> Boot Extended BootWare
|<5> Boot Backup Extended BootWare
|<0> Reboot
============================================================================
Ctrl+U: Access BASIC ASSISTANT MENU
Enter your choice(0-5):
Table 13 BASIC-BOOTWARE menu options
Option
<1> Modify Serial
Interface Parameter
<2> Update Extended
BootWare
Prompt message
Press Ctrl+D to access
BASIC-BOOTWARE MENU
Ctrl+D = Quit
Memory Test(press Ctrl+C to skip it,press
Ctrl+E to ECHO INFO)
Ctrl+F: Format File System
Press Ctrl+T to start memory test
Access BASIC ASSISTANT MENU
Ctrl+Z: Access EXTENDED ASSISTANT
MENU
Task
Change the baud rate of the
console port.
Perform this task before
downloading an image through the
console port for software upgrade.
Upgrade the extended BootWare
segment.
If the extended segment is corrupt,
choose this option to repair it.
Function
Accesses the BASIC-BOOTWARE menu
while the device is starting up.
Exits the parameter settings menu.
Prints information during the memory test.
Formats the current storage medium.
Performs a memory test.
Accesses the BASIC ASSISTANT menu from
the BASIC-BOOTWARE menu.
Accesses the EXTENDED ASSISTANT
menu from the EXTENDED-BOOTWARE
menu.
37
Reference
Modifying serial port parameters
Upgrading the extended BootWare
segment
|
|
|
|
|
|