Connecting The Pgnd Cable; Connection In Generic Grounding Environment - H3C S12500 Installation Instructions Manual

Figure 3-5 Install the cabling racks
(1) Cabling racks

Connecting the PGND Cable

For the safety of operators and equipment, the switch must be well grounded. The resistance reading
between switch chassis and the ground must be less than 1 ohm.

Connection in Generic Grounding Environment

Generally, cabinets are equipped with a grounding strip. You can connect the grounding wire
(yellow-green PGND cable) of the switch to the grounding strip for it.
Use the supplied PGND cable (CAT 6 cable with dual-hole OT terminals).
(2) Mounting screw
3-5