Page 3
Preface The H3C S12500 documentation set includes 17 command references. These references describe the commands and command syntax options available for the H3C S12500 Series 10G Core Routing Switches. The OAA Command Reference describes OAP and OAP module configuration commands on the switch.
Page 4
Convention Description be entered 1 to n times. A line that starts with a pound (#) sign is comments. GUI conventions Convention Description Window names, button names, field names, and menu items are in Boldface. For Boldface example, the New User window appears; click OK. >...
Page 5
Guides you through installing adjustable slider rails Installation Guide to a rack. H3C High-End Network Describes the hot-swappable modules available for Products Hot-Swappable the H3C high-end network products, their external Module Manual views, and specifications. Describe software features and configuration Configuration guides procedures.
Page 6
Obtaining documentation Access the most up-to-date H3C product documentation on the World Wide Web at http://www.h3c.com. Click the links on the top navigation bar to obtain different categories of product documentation: [Technical Support & Documents > Technical Documents]—Provides hardware installation, software...
OAP module commands oap connect Use oap connect to log in to the CLI of an OAP module from the device. You can also use this command to log in to another operating system that is running on a card in the device. Syntax In standalone mode: oap connect slot slot-number...
Page 9
oap reboot slot slot-number In IRF mode: oap reboot chassis chassis-number slot slot-number Views User view Predefined user roles network-admin mdc-admin Parameters slot slot-number: Specifies an OAP module by its slot number. (In standalone mode.) chassis chassis-number slot slot-number: Specifies an OAP module in an IRF member device by the member ID and slot number.
OAP commands display oap client info Use display oap client info to display OAP client information. Syntax display oap client info [ client-id ] Views Any view Predefined user roles network-admin network-operator mdc-admin mdc-operator Parameters client-id: Specifies an OAP client by its ID in the range of 1 to 255. If you do not specify this argument, the command displays information about all OAP clients in ascending order of client IDs.
MAC Address: 3ce5-a6ad-7abf Interface: Ten-GigabitEthernet2/19/0/1 Last registered: 08/29/2007 11:52:43 Client ID: 2 Status: Registered MAC Address: 0cda-414a-95ae Interface: Ten-GigabitEthernet2/16/0/1 Last registered: 08/29/2007 12:41:39 Table 1 Command output Field Description Status Status of the OAP client, which is always Registered. MAC Address MAC address of the OAP client.
[Sysname] oap client close 1 Related commands • display oap client summary oap client reboot • oap client reboot Use oap client reboot to restart an OAP client. Syntax oap client reboot client-id Views System view Predefined user roles network-admin mdc-admin Parameters client-id: Specifies an OAP client by its ID in the range of 1 to 255.
oap timer monitor Use oap timer monitor to set the client monitoring timer. Use undo oap timer monitor to restore the default. Syntax oap timer monitor seconds undo oap timer monitor Default The client monitoring timer is set to 5 seconds. Views System view Predefined user roles...