I - 3. Meaning Of The Leds - Teldat ATLAS 150 Installation Manual

I - 3. Meaning of the LEDs

ON Power-on indicator. It lights up when connected to the power.
DEVICE OPERATION:
S
OFF:
RED:
YELLOW:
GREEN:
console.
X Not used in the current version.
OFF:
LAN1-2
RED:
test.
YELLOW:
GREEN:
ISDN OFF:
RED:
B1 – B2
YELLOW:
GREEN:
GREEN-YELLOW: Channel configured in permanent mode, i.e. not switched.
OFF:
RED:
SERIAL
AMARILLO: In process of initializing the interface.
VERDE:
VERDE-AMARILLO: Depending on the type of interface. The interface is down and the backup
mechanism is active.
Atlas 150 Router Front Panel
System off.
ERROR: Component operating incorrectly.
The device has a telnet connection activated and is being remotely accessed.
System initialized and operating. The device can be accessed via the local
Interface not supported or is not available.
Interface is not available either because it is not enabled or there is a malfunction in the auto-
Interface initialization in process.
Interface available. Flashing: Maintenance frame being sent.
Physical layer not available, either due to cabling problems or to energy saving
procedures.
Temporary, in process of establishing a call.
Permanent, ERROR: errors have been detected in the line or in the call process.
ISDN physical layer is established.
Flashing. Call is established.
Interface not supported or not available.
ERROR: component malfunction.
Flashing. System initialized and operating.
ATLAS 150
Installation
I-9
Doc. Dm697-I
Rev. 1.0