Chapter 3 Meaning Of The Leds - Teldat H1 HSDPA Installation Manual

3 Meaning of the LEDs

Chapter 3 Meaning of the LEDs

The following figure shows the positions of the LEDs on the front panel of the device:
Teldat H Automotive: Front panel
Fig. 13:
A
B
C
LNK
100
12
Wireless WAN interface channel 0 (cellular0/1).
OFF: Interface not available, not installed or not registered.
ON: Registered, or registered and connected in the SIM operator Network.
- STEADY: Not transferring data.
- FLASHING: Transferring data.
Wireless WAN interface channel 1 (cellular0/1).
OFF: Interface not available, not installed or not registered.
ON: Registered, or registered and connected in the SIM operator Network.
- STEADY: Not transferring data.
- FLASHING: Transferring data.
The device has a MINI-PCI slot where a Wireless LAN daughter card can be in-
stalled.
OFF: Interface not available, not installed or not established.
ON: Connecting, or connected and communication established.
- STEADY: Not transferring data.
- FLASHING: Transferring data.
Associated to each Ethernet switch connector (LAN1, LAN2, LAN3 and LAN4)
ON Ethernet link established.
- STEADY: Not transferring data.
- FLASHING: Transferring data.
Associated to each Ethernet switch connector (LAN1, LAN2, LAN3 and LAN4)
ON Connected at 100 MHz
OFF Connected at 10 MHz
Teldat S.A.
Teldat H Automotive Family