I - 3.2. Atlas 360 - Teldat ATLAS 160 Installation Manual

-Right: SFP present
OFF:
RED:
Metallic connector:
-Left:
ORANGE:
GREEN:
-Right:
YELLOW:
OFF:

I - 3.2. ATLAS 360

ON Power-on indicator. It lights up when connected to the power supply
S Router operation
OFF:
STEADY:
SLOT [1-4] Depends on the card installed in the PCI Slot. Normally this is:
OFF:
A & B
RAPID FLASHING:
SLOW FLASHING:
STEADY:
SLOT 5 The device has a MINI-PCI slot where you can install a Wireless LAN daughter card.
Please see the manual on Wireless LAN interfaces to check how the LEDs operate.
A & B
Specific connector LEDs
SFP not present.
SFP present.
10Mbps. Flashing depends on the activity.
100Mbps. Flashing depends on the activity.
1000Mbps. Flashing depends on the activity.
Both off means the link has not been detected.
ATLAS 360 LEDs
System stopped.
System initialized and operating.
Interface not available or not installed (not supported).
Interface not established, without data connection.
Connecting.
Communications established.
ATLAS X60
Installation
I-8
.
Doc. Dm695-I
Rev. 1.0