Duplex Wait Clutch - Lexmark W820 Service Manual

Duplex Wait Clutch

Removal
1.
2.
3.
4.
Replacement
1.
2.
3.
4.
5.
4-8
Service Manual
Remove the Duplex Rear Cover.
Disconnect P/J224 (Wait Clutch) from the Duplex PWB.
Remove the E-ring from the end of the Wait Clutch shaft.
Push up on the shaft latch as you slide the Clutch off of the shaft.
Position the Wait Clutch so the notch in the Clutch lines up with the tab on the
Duplex frame.
Slide the Clutch onto the shaft. The shaft latch snaps the Clutch into place on the
shaft.
Use an E-ring to secure the Clutch to the shaft.
Reconnect P/J224 to the Duplex PWB.
Reinstall the Duplex Rear Cover.
4025 Options