Inner Chute Assembly - Lexmark W820 Service Manual

Inner Chute Assembly

Removal
1.
2.
3.
4.
Replacement
1.
2.
3.
4.
5.
4-18
Service Manual
Remove the Duplex Unit Assembly.
Open the Inner Chute.
Use the flat blade of a screwdriver to pry (arrow in the figure) the rear hinge of the
Inner Chute out of the hole in the Duplex frame.
Remove the Inner Chute.
Position the Inner Chute as shown.
Insert the front hinge of the Chute into the hole in the Duplex frame.
Push in on the rear hinge and insert it into the hole in the frame.
Open and close the Chute to make sure it moves freely.
Reinstall the Duplex Unit Assembly.
4025 Options