Tray 4 Take Away Sensor
Removal
1.
2.
3.
Replacement
1.
2.
3.
4.
4-88
Service Manual
Remove Tray 3, Tray 4, and Tray 5 from the HCF.
Squeeze together the four latches that are located at the four corners of the Tray 4
Take Away Sensor, while pulling the Sensor up and out of the cutout in the HCF
frame.
Disconnect P/J 126 from the Sensor.
Position the Sensor above the cutout in the HCF frame, and with the P/J facing
down.
Insert the Sensor into the cutout, and press down on the Sensor to snap it into place.
Reconnect P/J 126 to the Sensor.
Reinstall Tray 5, Tray 4, and Tray 3.
4025 Options