High Capacity Feeder Symptom Table; High Capacity Feeder Error Code Service Checks - Lexmark W820 Service Manual

Error Code
257
258
943
944
945
993
994

High Capacity Feeder Symptom Table

Symptom
Inoperative High Capacity Feeder

High Capacity Feeder Error Code Service Checks

Error Code 245
There is a paper jam between Tray 3 and Tray 2 Take Away Sensor.
Logic Control on the MCU PWB sensed that the Tray 2 Take Away Sensor did not actuate
within the specified time after the Tray 3 Feed Clutch was actuated.
Step Actions and Questions
1 Are all the feed rolls correctly installed? Go to
Nudger, Feeder, and Retard Rolls" on page
Feed, Nudger, and Retard Rolls" on page
Feed, Nudger, and Retard Rolls" on page
2 PAPER INSPECTION
Inspect the paper that is loaded in the paper cassette.
Is the paper loaded in the cassette wrinkled or damaged?
4025 Options
Description
Logic Control on the MCU PWB sensed the Tray 3 Take Away Sensor was on
while the printer was in standby. Go to
Logic Control on the MCU PWB sensed the Tray 4 Take Away Sensor was on
while the printer was in standby. Go to
Logic Control on the MCU PWB sensed that the Tray 3 Paper Level Sensor did
not actuate within the specified time after the Tray 3 Lift Motor was actuated.
Go to "Error Code 943" on page
Logic Control on the MCU PWB sensed that the Tray 4 Paper Level Sensor did
not actuate within the specified time after the Tray 4 Lift Motor was actuated.
Go to "Error Code 944" on page
Logic Control on the MCU PWB sensed that the Tray 5 Paper Level Sensor did
not actuate within the specified after the Tray 5 Lift Motor was actuated. Go to
"Error Code 945" on page
Logic control sensed that the installed High Capacity Feeder is not compatible
with the printer. Go to "Error Code 993 and 994" on page
Logic control sensed that the installed High Capacity Feeder is not compatible
with the printer. Go to "Error Code 993 and 994" on page
"Error Code 257" on page 2-45
"Error Code 258" on page
2-48.
2-49.
2-50.
Action
Go to "Inoperative High Capacity Feeder" on
page 2-52.
Yes
"Tray 3 Go to step 2
4-84, "Tray 4
4-96, and "Tray 5
4-104.
Replace the
paper with
new paper
2-46.
2-51.
2-51.
No
Install
correctly or
replace as
necessary
Go to step 3
Diagnostic Information
2-33