Feed From Tray 3 - Lexmark W820 Service Manual

4025 Options

Feed from Tray 3

At the start of a print cycle the Tray 3 Nudger Roll moves a sheet of paper into Tray 3
Feed Roll. The Feed Roll moves a single sheet of paper out of Tray 3 and toward the Tray
2 Take Away Roll in the base engine. The Tray 3 Retard Roll makes sure that only one
sheet of paper is fed. As the sheet of paper is driven to the Tray 2 Take Away Roll it
actuates the Tray 2 Take Away Sensor, notifying the MCU PWB logic that the paper has
arrived. The Tray 2 Take Away Roll drives the sheet into Tray 1 Take Away Rolls. Tray 1
Take Away Rolls drive the sheet of paper into the Registration Roll. After that, the sheet
continues along the printer paper path until the sheet of paper, complete with fused
image, is driven into an output tray.
1-56
Service Manual