Sensor Test - Lexmark W820 Service Manual

Standard Bin, Bin #1, Bin #2, Bin #3, Bin #4, Bin #5, Bin #6, Bin #7, Bin #8, Bin #9, Bin
#10, Bin #10, Bin #9, Bin #8, Bin #7, Bin #6, Bin #5, Bin #4, Bin #3, Bin #2, Bin #1,
Standard Bin, Standard Bin, Bin #1, Bin #2,...
During execution of this test, the following message is displayed. The Power indicator
blinks while pages are being fed through the printer and installed options.
All Bin Test
Feeding...
This test is only executed as a continuous test. This means to stop execution of the test,
the user must explicitly stop the test by pressing Return or Stop. Once the user stops the
test, the following message is displayed until all remaining media currently moving
through the paper path is fed to the appropriate output destination.
All Bin Test
Cancelling...

Sensor Test

Use this test to determine whether or not the output bin sensors are working correctly. To
run the test, select the Sensor Test operation from the OUTPUT BIN TESTS menu.
The following sensors will be listed in the bottom level menu:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
To select one of the sensor above, Press either Menu> or Menu< until the sensor you
want is displayed. Press Select for that sensor.
Once the screen displays, you can manually actuate the sensor. When the sensor is
closed, CL displays. Likewise, when the sensor is open, OP displays. If the wrong
message displays, the sensor may be malfunctioning.
To exit the sensor test, press Return or Stop.
3-4
Service Manual
Output Bin1
Output Bin 2
Output Bin 3
Output Bin 4
Output Bin 5
Output Bin 6
Output Bin 7
Output Bin 8
Output Bin 9
Output Bin 10
Vertical Sensor
Bin 10 Jam Sensor
MBX In Sensor
Door Interlock
4025 Options