Paper Path 3 Components - Lexmark W820 Service Manual

Paper Path 3 Components

The Mailbox paper path when the paper destination is Bin 1 through Bin 9 is made up of a
number of components.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1-36
Service Manual
In Gate Solenoid
Toggles the In Gate.
In Gate
Switches the paper path from the Output Tray to the Mailbox.
Entrance Sensor
Monitors paper arriving at the Mailbox.
Bin Rolls and Pinch Rolls
Drives the sheet of paper up the Mailbox paper path.
Bin Gates 1 through 9
When closed, the paper moves over the top of the Gates. When open, the paper is
diverted into the Bin that the Gate controls. In this example, Bin 5 is open.
Bin Gate Solenoids 1 through 9
Toggles the corresponding Bin Gate open and closed. Bin 10 does not have a Bin
Gate Solenoid.
Bin 10 Full Stack Sensor
Monitors the paper level in Bin 10.
Bin 10 No Paper Sensor
Monitors the presence of paper in Bin 10.
Vertical LED and Sensor
Monitors paper travel into Bins 1 through 9.
4025 Options