Duplex Exit Sensor - Lexmark W820 Service Manual

Duplex Exit Sensor

Removal
1.
2.
3.
Replacement
1.
2.
3.
4.
5.
6.
4-10
Service Manual
Remove the Duplex Cover.
Squeeze the four latches securing the Sensor to the bracket on the Upper Chute and
remove the Duplex Exit Sensor.
Disconnect P/J 124 from the Sensor.
Remove the Duplex Cover.
Position the Duplex Exit Sensor so the P/J faces the wire harness.
Insert the Sensor actuator through the opening in the Upper Chute.
Press the four latches on the bottom of the Sensor into the four openings in the
bracket on the Upper Chute. The Sensor snaps into place.
Reconnect P/J 124 to the Sensor.
Reinstall the Duplex Cover.
4025 Options