Tray 4 Paper Path Components - Lexmark W820 Service Manual

Tray 4 Paper Path Components

The HCF Tray 4 Paper Path is made up of a number of transport rolls and paper sensors.
1.
Tray 4 Assembly
Holds plain paper of various sizes. Slides into the bottom left feeder, Feeder 4, of the
High Capacity Feeder.
2.
Tray 4 Lift Motor
Raises the tray bottom plate so the paper contacts the Feed Roll.
3.
Tray 4 No Paper Sensor
Monitors the level of paper in Tray 4.
4.
Tray 4 Paper Size Sensor
Monitors the size of paper loaded into Tray 4.
5.
Tray 4 Feed Clutch
Transmits HCF Motor drive to the Tray 4 Feed Roll and Nudger Roll.
6.
Tray 4 Nudger Roll
Drives the top sheet of paper into the Feed Roll.
7.
Tray 4 Feed Roll
Drives the top sheet of paper out of Tray 4 and into the Tray 4 Take Away Roll.
8.
Tray 4 Take Away Roll
Drives the sheet of paper out of Feeder 4 and into Tray 3 Take Away Roll.
9.
Tray 3 Take Away Sensor
Monitors paper travel from the Tray 4 to Tray 3 Take Away Roll.
10.
Tray 3 Take Away Roll
Drives the sheet of paper into the Tray 2 Take Away Roll area of the base engine.
11.
Tray 2 Take Away Sensor
Monitors paper travel from the HCF into the base engine.
12.
Tray 2 Take Away Roll
Drives the sheet of paper into the printer Registration Rolls.
13.
Tray 1 Take Away Roll
Part of the base engine. Drives the sheet of paper into the printer Registration Rolls.
4025 Options
1-59
General Information