Display Screen; Audio Screen - Extron electronics TouchLink TLP Pro 1020 Series User Manual

Display Screen

Status
2
3
4
Minutes
Figure 12.
The Display screen allows you to set the Sleep Timer, Auto Brightness, LCD Brightness, and
Wake on Motion.
The Sleep Timer determines how long the panel will be inactive before it enters sleep
z
mode, when the screen goes dark to save power — toggle between On and Off. If the sleep
timer is On, use the arrows to adjust the value between 1 and 120 minutes.
Auto Brightness — provides a suitable amount of backlighting that is automatically
z
calculated from the amount of ambient light detected by the light sensor (see
on page 5).
LCD Brightness — allows you to adjust the screen brightness, using the slider control.
z
Wake on Motion — activates the panel from Sleep mode when motion is detected near the
z
unit. Toggle between

Audio Screen

Status
100
50
Figure 13.
On the Audio screen, use the slider controls to adjust the
settings.
Master volume sets the maximum volume for all the other sound volume settings. For
z
example, if the master volume is set to 80 (80 percent of maximum), even when the Sounds
volume is set to 100, it is equivalent to only 80 percent of maximum.
Click sets the volume for audible feedback that accompanies events such as a screen
z
button being pressed.
Sounds sets the volume of audio from any audio file playback.
z
Display
Network
Sleep Timer
0
On Off
Display Screen
and .
On Off
Display
Network
Master
Click
100
50
0 0
Audio Screen
TLP Pro 720 Series and TLP Pro 1020 Series • On-screen Menus
Audio Advanced Exit
Auto Brightness
On Off
LCD Brightness
50 100
Wake on Motion
On Off
Audio Advanced Exit
Sound
100
50
0
,
Master Click
figure 2, ,
D
, and volume
Sound
17