Network Screen - Extron electronics TouchLink TLP Pro 1020 Series User Manual

Network Screen

Verify with your network administrator whether the IP address for the touchpanel is assigned by
Dynamic Host Configuration Protocol (DHCP) or set manually. If they are set manually, you need
to obtain an IP address, a subnet mask, a gateway address, and a Domain Name Server (DNS)
IP address from the network administrator.
Status
Host Name:
IP Address:
Subnet Mask:
Gateway:
Figure 9.
1.
If IP addresses are assigned by DHCP, press
yellow. If DHCP is selected, you will only be able to set the Host Name and the DNS IP
address. All other values are set by the DHCP server.
If IP addresses are assigned manually, press
edited.
2.
Edit the
Figure 10.
Use the keypad to enter a new name, which appears in the
z
Use the backspace character (
z
The right and left arrows move the cursor inside the
z
Click the
z
Press
z
Display Audio
Network
DHCP
On Off
DNS Primary:
TLP-AB-CD-EF
Domain Name:
192.168.254.251
MAC Address:
255.255.255.0
0.0.0.0
Network Screen
by pressing that button. A keypad opens:
Host Name
Alphanumeric Keypad
key to toggle between upper and lower case letters.
Shift
to save the new name.
Enter
TLP Pro 720 Series and TLP Pro 1020 Series • On-screen Menus
Advanced Exit
127.0.0.1
00-05-A6-AB-CD-EF
Revert Apply
. The selected button is highlighted in
On
. When DHCP is Off, all values can be
Off
Host Name
) to delete existing characters.
Host Name
text box.
text box.
15