Table of Contents
Advertisement
Features and Menus
"Central settings" Menu
In this menu you can define rules and settings for the time management of your
system.
The Time control menu item is available if the user group of your telephone has been
granted "Time control" in the Configurator. The Date/Time menu item is available if
the user group of your telephone has been granted "Configurator – Expert" in the
Configurator. If you do not have either of these authorisations this menu will not be
displayed on your telephone.
First select Central settings and then ...
•
Time control: In the OpenCom 100 / Aastra 800 several time groups can be con-
figured. Depending on the activated time group, incoming calls are signalled on
different telephones. Switching between these time groups can be done manually
or automatically, in this case according to a timetable configured by the system
administrator.
Select Automatic to activate automatic time control. The configured time groups
then change automatically according to the timetable configured by the system
administrator. This setting remains active until one of the available time groups is
set manually.
The system administrator can configure up to ten time groups. The time groups
are either numbered (default setting) or they have been given names by the
system administrator. You can manually select a specific time group; the automatic
time control is then deactivated.
Note
Any "Divert MSN" always remains in effect, regardless of the currently active time
group.
•
Date/Time: The date and time are taken over from the exchange on the first
external outgoing call. If this information is not transmitted by your network
operator, you can set the date and time here yourself.
88
Advertisement
Table of Contents
