Table of Contents
Advertisement
Features and Menus
•
Pick-up: This accepts a call for another telephone in your pick-up group.
If the called subscriber is a member of a user group for which pick-up protection is
active, then you cannot pick up calls to this subscriber's number.
•
Pick-up select.: You can answer a call for any other telephone. To do this, enter the
call number of the other telephone.
If the called subscriber is a member of a user group for which pick-up protection is
active, then you cannot pick up calls to this subscriber's number.
Note
If the other terminal is already in the call state (e. g. an answering machine is in an-
nouncement mode), you pick up the call. The subscriber for whom you pick up the
call must belong to a user group for which the "Call removal" authorisation is acti-
vated, otherwise "Pick-up selective" is not possible.
•
Take: You accept a current call from a different terminal at your DECT telephone
and continue your call on your DECT telephone. The prerequisite is that your DECT
telephone and the other terminal have the same internal call number.
Or select Dial, then ...
•
Announcement... After entering the call number, you can initiate an
announcement on another system telephone. Under To: enter the call number.
Announcements can also be directed to call numbers at which several callers can
be reached (see also Announcements (with and without Intercom) starting on
page 60).
Note
If a called user has activated the announcement protection (see page 82), this feature
is not carried out.
•
Intercom: Use this function to initiate an announcement to a single system ter-
minal, The microphone of the system terminal will be switched on and the person
you are calling can immediately answer your announcement without having to
press a button. Enter the device ID of the terminal for Device-ID:. For information
on the existing device IDs, speak with your system administrator.
84
Advertisement
Table of Contents
