Table of Contents
Advertisement
Features and Menus
calls or all calls should be forwarded to the destination number. Activate call
forwarding with on. Active call forwarding is indicated by a "+" sign. This is followed
by the call forwarding destination.
Note
All calls for the call numbers of your telephone are forwarded. If a number is stored
on more than one telephone, then calls made to any of the other telephones will be
forwarded as well.
Divert MSN: "Divert MSN" is available for ISDN multi-terminal accesses. For each MSN
you can use this form of call forwarding to forward incoming external calls to
external destinations. Several MSNs can be grouped together (this is configured by
the system administrator) and forwarded to a common destination number.
The display indicates a list of the configured MSNs and MSN groups. Select an entry.
Then select Immediately, After delay or Busy for the forwarding mode. Then key in
the external destination number and activate the function. Active call forwarding is
indicated by a "+" sign. This is followed by the call forwarding destination. A "?" pre-
ceding the entry, ? MSN Group 1 for example, means that call forwarding is active for
some MSNs or that there are different call forwardings activated for this group.
Note
For this type of call forwarding, the (external) destination number is always entered
without the trunk line seizure code digit. If "Divert MSN" is executed in the exchange
(= external call forwarding, configured by the system administrator), it can take a few
seconds after configuration for call forwarding to be activated in the exchange.
Divert door: With this type of call forwarding, all calls signalled by the doorbell are
forwarded. If several doorbells are configured on the communications system, first
select the doorbell whose calls are to be diverted. How many door bells are available
and with which names they are listed in the menu, depends on the type of entrance
intercom. Consult your system administrator if you have questions concerning the
configuration of the door bells. Then key in the call forwarding destination (please
refer to the chapter entitled Making External/Internal Calls starting on page 38).
Activate call forwarding with On. Active call forwarding is indicated by a "+" sign. This
is followed by the call forwarding destination.
72
Advertisement
Table of Contents
