Table of Contents
Advertisement
Features and Menus
any digit key. After each signalled alarm, you will need to reactivate the alarm
again.
– Set: Here you enter the wake time, for example 12:15. Confirm your input with
OK.
– Active: With OK you activate (") or deactivate the alarm.
Note
When the alarm is active, the idle display shows an alarm symbol ( ) next to the
time.
•
SOS Key: You can dial a pre-programmed SOS number by pressing and holding
R
the
key; you do not need to press receiver key
internal or external call number. If you want to programme an external number as
the SOS number you may – depending on the system configuration – have to
precede it with the external line seizure digit (see also Making External/Internal
Calls starting on page 38). With the OpenPhone 26 you can use the telephone
book when programming a call number for the SOS key. Press the Phoneb. softkey
and select the desired phone book entry using the arrow keys.
Open 100 / Aastra 800 systems only: Always save the SOS emergency call
number with the prefixed R key function (enquiry/hold). Then an emergency call
can also be made during a call (depending on mobile unit – see above). Press the
R
R key
to enter the R key function.
Other systems: The "Hold" function may be generated using other codes on other
systems. The respective system documentation provides information on suitable
programming.
Note
You can also use the emergency call key / SOS key even when the key lock and the
telephone lock are activated.
•
Aut. Call answ. (OpenPhone 26) / Auto Answer (OpenPhone 27): If the phone is
removed from the charging station when a call is signalled, the call is accepted
immediately; you do not need to press the receiver key
activate (") or deactivate the function.
80
A
. You can enter and save any
A
. Use the OK softkey to
Advertisement
Table of Contents
