Table of Contents
Advertisement
USB Connection
USB Driver Installation
The OpenPhone 27 has a USB port for connecting to a PC. You have to first install the
USB driver for the OpenPhone 27 before you can use this connectivity option. To do
so, you require:
•
a PC with Microsoft Windows and USB port,
•
a USB data cable for your OpenPhone 27
•
and the USB driver installation programme. The installation programme is
included on the OpenCom 100 product CD or on the Aastra 800 USB stick and can
be downloaded on the Internet at http://www.aastra.de or http://
www.aastra.com.
Note
The OpenPhone 27 cannot be connected during driver installation.
1.
Log in to Windows as administrator.
2.
Start the USB driver installation programme via "setup.exe". Follow the steps in the
installation assistant.
3.
Then connect the OpenPhone 27 using the USB data cable. Use an available USB
port on your PC.
Connect the USB data cable
4.
Check the USB connection. Start the System applet in the Windows Control Panel.
Select the Hardware tab in the Control Panel dialogue. Then click on the Device
PC / Laptop
USB Connection
91
Advertisement
Table of Contents
