Table of Contents
Advertisement
The Generic Access Profile (GAP) and the DECT standard define processes used by
digital cordless telephones to establish connections. The GAP standard is not manu-
facturer-specific so it is possible to combine the communication systems and
handsets of different vendors. The basic functions (making and receiving calls) are
always possible with these combinations, but other functions provided by your
OpenCom 100 / Aastra 800 communications system together with your handset (e. g.
display of call numbers or call charges) may not be available when communications
systems produced by other manufacturers are used.
Additional Notes
Depending on the digital transmission in the frequency range used and also on the
technical environment within the range of coverage, silent zones may occur. In this
case, transmission quality can be diminished by multiple, short transmission gaps.
Slight movement out of the silent zone will restore typical transmission quality. The
connection will be lost if the handset is moved out of range.
In order to avoid radio coupling into other electronic equipment, we recommend the
maximum possible distance (min. 1m) between the charging station / handset and
other devices (e. g. radios, loudspeakers etc.)
Before using the handset, people with hearing aids should note that radio signals can
couple into hearing aids and if strong enough can cause an unpleasant buzzing
sound.
Installation
Installation Site
Place the charging station on a flat, even surface. Do not place the charging station or
accessories near:
•
water, moisture or damp areas
•
heat sources, direct sunlight or inadequately ventilated areas
•
devices that produce strong magnetic fields, electrical devices, fluorescent lamps,
computers, radios, television sets, fax machines and telephone terminals
•
areas where the equipment may be covered, penetrated by fluids and where its
ventilation is impaired
Your Telephone's Features
11
Advertisement
Table of Contents
