Smart Card Slo - Toshiba TECRA R10 Maintenance Manual

4.19 Smart card slot
4.19 Smart card slot
Removing the Smart card slot
To remove the Smart card slot, follow the steps below and refer to Figure 4-27.
1. Peel the INSU FPC SC on the TPAD PLT ASSY.
2. Disconnect the FPC of Smart card slot from the connector CN2170 on the system
board.
3. Lift the hook of Smart card slot and slide it to the left to remove.
Smart card slot
TECRA R10 Maintenance Manual (960-708)
FPC of Smart card slot
INSU FPC SC
Hook
Figure 4-27 Removing the Smart card slot
4 Replacement Procedure
CN2170
T PAD PLT ASSY
Bluetooth module
harness
[CONFIDENTIAL] 4- 47