Toshiba TECRA R10 Maintenance Manual page 272

4 Replacement Procedures
Installing the Bluetooth module
To install the Bluetooth module, follow the steps below and refer to Figure 4-26.
1. Connect the BT HARNESS to the connector on the Bluetooth module.
2. Set the Bluetooth module on the COVER ASSY while inserting the hole into the guide.
3. Slide the BT HOLDER under the four guides until the hook is latched.
CAUTION: When connecting the BT HARNESS to Bluetooth module, insert it carefully not
to damage the Bluetooth module.
4-46 [CONFIDENTIAL]
4.18 Bluetooth module
TECRA R10 Maintenance Manual (960-708)