Toshiba TECRA R10 Maintenance Manual page 212

3 Tests and Diagnostics
(f) Auto Power On
Use this option to set a time and date for automatic power on and enable or
disable the ring indicator feature. Alarm Date Option appears only when
Alarm Time is enabled.
Set the parameters for the Auto Power On (automatic power on) function and
the Wake-up on LAN in the "OPTIONS" window. To set the time, use Space
or BackSpace. Press ↓ to move the cursor to the right and ↑ to move the
cursor to the left when you set the date and time.
For the Alarm Time, set the time to turn on the power automatically. The
"second" cannot be set. When it is set to "Disabled", the time to turn on
automatically is not set.
The Wake-up on LAN is a function to turn on the power automatically by the
call from the administrator. It can be set to "Enabled" only when "Built-in
LAN" is set to "Enabled". To activate this function, use the AC adapter.
On Battery
The following settings can be changed when the Wake-up on LAN is Enabled.
Enabled
Disabled
NOTE:
1. Do not remove the AC adaptor and battery pack at the same time when you use this
feature. If you do so, data saved by the resume function will be lost. You must also
reset this option.
2. If you have set a password and the computer boots by the Auto Power On function and
Standby is on, the computer will start with the instant security function enabled. The
password = message is not displayed; however, you must enter the password to use the
computer.
3. This option is enabled only once, the setting is reset, after booting up.
3-90 [CONFIDENTIAL]
OPTIONS
Alarm Time
Wake-up on LAN
on Battery
Critical Battery Wake-up
Wake-up on LAN function whenoperating from the battery.
Wake-up on LAN function whenoperating from the battery
(Default).
= Disabled
= Disabled
= Disabled
= Enabled
TECRA R10 Maintenance Manual (960-708)
3.32 SETUP