1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Desktop
  5. Satellite T110
  6. Maintenance manual

Toshiba Satellite T110 Maintenance Manual

Hide thumbs Also See for Satellite T110:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Manual Del Usuario
Toshiba Personal Computer
Satellite T110/Satellite ProT110/PORTEGE T110
Maintenance Manual
TOSHIBA CORPORATION
File Number 960-Q08
Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite T110

Summary of Contents for Toshiba Satellite T110

  • Page 1 Toshiba Personal Computer Satellite T110/Satellite ProT110/PORTEGE T110 Maintenance Manual TOSHIBA CORPORATION File Number 960-Q08 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 2 © 2009 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the information contained herein.
  • Page 3 Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite T110, Satellite Pro T110, and PORTEGE T110 Series. The procedures described in this manual are intended to help service technicians isolate faulty Field Replaceable Units (FRUs) and replace them in the field.
  • Page 4 FRUs. Appendices The appendices describe the following:  Handling the LCD Module  Board layout  Pin assignments  Keyboard scan/character codes  Key layout  Wiring diagrams Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 5 Text that you are instructed to type in is shown in the boldface type below: DISKCOPY A: B: The display Text generated by the computer that appears on its display is presented in the typeface below: Format complete System transferred Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 6: Table Of Contents

    TFT Color Display.......................13 1.5.1 LCD Module with CCFL Backlight .............13 Power Rails ........................14 Batteries ........................15 1.7.1 Main Battery ....................15 1.7.2 Battery Charging Control................15 1.7.3 RTC battery....................17 AC Adapter ........................18 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 7 Procedure 2 Diagnostic Test Program Execution Check ..........22 Procedure 3 Connector and Cable Check ..............23 Procedure 4 Replacement Check ................24 LAN Troubleshooting....................25 Procedure 1 Diagnostic Test Program Execution Check ..........25 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 8 Procedure 2 Connect Check and Replacement Check ..........38 2.18 CRT Troubleshooting ....................39 Procedure 1 External Monitor Check................39 Procedure 2 Connector and Cable Check ..............39 Procedure 3 Replacement Check .................39 2.19 USB Troubleshooting ....................40 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 9 Procedure 2 Connect Check and Replacement Check ..........40 2.20 LED Troubleshooting ....................41 Procedure 1 Each function Execution Check.............. 41 Procedure 2 Connect Check and Replacement Check ..........41 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 10 3.20.1 How to operate a window .................65 3.20.2 How to Stop the Test Program................65 3.20.3 Test Status Screen .....................65 3.20.4 Test Stop Display....................66 3.20.5 How to enter data ....................66 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 11 4.15 Web Camera Module ....................51 4.16 Application for Thermal grease on CPU and North Bridge ........53 4.17 Speaker Box ........................ 55 4.18 HDD cable ........................ 57 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 12 Handling the LCD Module ................1 Appendix B Board Layout .....................1 Appendix C Pin Assignments....................1 Appendix D Keyboard Scan/Character Codes ...............1 Appendix E Key Layout......................1 Appendix F Wiring Diagrams....................1 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 13: Chapter 1 Hardware Overview

    Chapter 1 Hardware Overview Satellite T110/Satellite ProT110/PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 14 Keyboard........................11 TFT Color Display...................... 12 Power Rails ......................... 13 Batteries ........................14 1.7.1 Main Battery..................14 1.7.2 Battery Charging Control ..............15 1.7.3 RTC battery ................... 16 AC Adapter ......................... 17 Satellite T110/ Satellite Pro T110/PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 15 Time required for charges of main battery ............. 15 Table 1-7-3 Data preservation time ..................15 Table 1-7-4 Time required for charges of RTC battery............16 Table 1-8-1 AC adapter specifications ................17 Satellite T110/ Satellite Pro T110/PROTEGE T110 Maintenance Manual (960-Q08)

  • Page 16: Features

    Chapter 1 Hardware Overview 1.1 Features The Satellite T110/Satellite Pro T110/PROTÉGÉ T100 (Intel Platform) features are listed below. Microprocessor Microprocessor that is used will be different by the model. It supports processors as follows Intel® Core™2 Duo ULV CPU SU2700 1.30GHz CPU(956P)743 1.3G...
  • Page 17 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100 BASE-TX) Bridge Media Slot SD/SDHC/MS/MS pro/xD/MMC are supported. Bluetooth Some computers in this series offer Bluetooth wireless communication functionality. This module is Version 2.1+EDR. Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 18: Figure 1-1-1 Left Of The Computer

    9. Keyboard 10. Touch Pad 11. Touch Pad Control Right Buttons 12. Touch Pad Control Light Buttons 13. LED light indicator 14. Power Button Figure 1-1-1 Left of the computer Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 19: Figure 1-1-2 Right Of The Computer

    Chapter 1 Hardware Overview 1. Headphone Jack 2. Microphone jack 3. USB port 4. LAN jack 5. DC-IN jack Figure 1-1-2 Right of the computer Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 20: System Block Diagram

    Chapter 1 Hardware Overview 1.2 System Block Diagram Figure 1-2-1 shows the system block diagram. Figure 1-2-1 System block diagram for Intel Platform Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)
  • Page 21  Serial ATA (SATA) Controller  PCI Interface  Low Pin count (LPC) interface  Serial Peripheral Interface (SPI)  DMA controller  Advanced Programmable Interrupt Controller (APIC)  USB Controllers Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)
  • Page 22 • Card Reader controller (REALTEAK RTS5159 ) • 10/100 LAN controller (Atheros AR8132M) Mini Card Wireless LAN (BTO) IEEE802.11b/g or IEEE802.11b/g/n Wireless WAN (BTO) HSPA Blue tooth Bluetooth V2.1+EDR. (BTO) Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 23: Inch Hard Disk Drive

    TOS MK5055GSX Width (mm) 69.85 Outline Height (mm) Depth (mm) dimensions Weight (g) 97/98/101/102 Standard value Parameter HTS545025B9A300 HTS545032B9A300 HTS545050B9A300 Width (mm) 69.85 Height(mm) Outline dimensions Depth (mm) Weight (g) 101(Max) Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 24: Table 1-3-2 2.5-Inch Hdd Dimensions

    250GB 320GB 500GB (formatted) Speed (RPM) 5400 Data transfer Rate - To/From Media 363~952MB/S - T0/From Host 3GB/S Bus Transfer Rate 3GB/S Average random seek time (read) (ms) Power-on-to-ready (sec) Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 25: Table 1-3-3 2.5-Inch Hdd Specification

    Data transfer Rate - To/From Media 933MB/s Max. - T0/From Host 3Gb/s bus transfer rate 3Gb/s Average random seek 12.0ms/13.0ms time (read) (ms) Power-on-to-ready 4.0 (typ) (sec) Table 1-3-3 2.5-inch HDD Specification Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 26: Keyboard

    Chapter 1 Hardware Overview 1.4 Keyboard The Satellite T110, Satellite Pro T110, and PORTEGE T110 keyboard is for US style Figure 1-4-1 is a view of the keyboard for US style Figure 1-4-1 Keyboard for US style See Appendix E for details of the keyboard layout...

  • Page 27: Tft Color Display

    1,366 x 3(R,G,B) x Dots Dot spacing 0.2265(H)× 0.1875(H)× 0.1875(H)× 0.1875(H)× (mm) 0.2265(V) 0.1875(V) 0.1875(V) 0.1875(V) Display 262,144 colors 262,144 colors 262,144 colors 262,144 colors Colors Table 1-5-2 LCD module specifications Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 28: Power Rails

    No Battery Suspend mode Boot mode +5VPCU +3VPCU +3V_S5 +3VSUS +1.8VSUS +SMDDR_VTERM +SMDDR_VREF +1.8V +1.5V 1.25 +1.2V 1.05 +1.05v 1.0~1.2 +NB_CORE 0.7~1.2 VCC_CORE Table 1-6-1 CULV Power supply output rating Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 29: Batteries

    The main battery is the primary power supply for the computer when the AC adapter is not connected. In Standby, the main battery maintains the current status of the computer. Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 30: Battery Charging Control

    When turning off the power in being charged fully, the preservation time is as following Table 1-7-3. Sleep Shut down 6 cell About 3 days About 30 days Table 1-7-3 Data preservation time Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 31: Rtc Battery

    Table 1-7-4 lists the Time required for charges of RTC battery and data preservation time. Condition Time Charging time About 24 hours Data retaining time About 30 days Table 1-7-4 Time required for charges of RTC battery Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 32: Ac Adapter

    DELTA/ LITE-ON DELTA/ LITE-ON 2pin 3pin Power Input voltage AC 100V/240V Input frequency 50Hz/60Hz Input current ≦ 1.5A Output voltage DC 19V Output current 3.42A 3.42A Table 1-8-1 AC adapter specifications Satellite T110 / Satellite Pro T110 /PROTEGE110 Maintenance Manual (960-Q08)

  • Page 33: Chapter 2 Troubleshooting Procedures

    Chapter 2 Troubleshooting Procedures Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 34 Connector Check and Replacement Check......21 Display Troubleshooting..................... 22 Procedure 1 External Monitor Check............22 Procedure 2 Diagnostic Test Program Execution Check ......22 Procedure 3 Connector and Cable Check............ 23 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 35 Sound Recorder Execution Check .......... 38 Procedure 2 Connect Check and Replacement Check ........ 38 2.18 CRT Troubleshooting ....................39 Procedure 1 External Monitor Check............39 Procedure 2 Connector and Cable Check............ 39 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 36 Connect Check and Replacement Check ........ 40 2.20 LED Troubleshooting ....................41 Procedure 1 Each function Execution Check..........41 Procedure 2 Connect Check and Replacement Check ........ 41 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 37: Troubleshooting

    The implement for the Diagnostics procedures is referred to Chapter 3. Also, following implements are necessary: 1. Phillips screwdrivers (For replacement procedures) 2. Implements for debugging port check  Toshiba Free-DOS system Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 38: Troubleshooting Flowchart

    Before going through the flowchart steps, verify the following:  Ask customer to enter the password if a password is registered.  Verify with the customer that Toshiba Windows is installed on the hard disk. Non- Windows operating systems can cause the computer to malfunction.
  • Page 39 Chapter 2 Troubleshooting Procedures Figure 2-2-1 Troubleshooting flowchart (1/2) Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 40 Procedures in Section 2.5. 3. If an error is found on the keyboard test (DIAGNOSTICS TEST) and pressed key display test, perform the Keyboard Troubleshooting Procedures in Section 2.6. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 41 9. If an error is detected on the Bluetooth test, perform the Bluetooth Troubleshooting Procedures in Section 2.12. 10. If an error is detected on the HDMI test, perform the HDMI Troubleshooting Procedures in Section 2.13 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 42: Power Supply Troubleshooting

    Lights Green DC power is being supplied from the AC adapter. Blinks Orange Power supply malfunction Doesn’t light Any condition other than those above. Table 2-3-2 DC IN icon Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 43 Check 2 If the DC IN icon does not light, go to Procedure 3. Check 3 If the battery icon does not light orange or green, go to Procedure 4. NOTE: Use a supp lied AC adapter. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 44: Procedure 2 Connection Check

    If the battery pack is still not charged, go to Check 5. Check 5 Replace the battery pack with a new one. If the battery pack is still not charged, Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 45 Chapter 2 Troubleshooting Procedures go to Procedure 4. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 46: Procedure 4 Replacement Check

    Battery pack may be faulty. Replace it with a new one. If the problem still occurs, perform Check 2. Check 2 System board may be faulty. Replace it with a new one. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 47: System Board Troubleshooting

    Procedure 1 and continue with the other procedures as instructed. The procedures described in this section are: Procedure 1: Message Check Procedure 2 Diagno stic Test Program Execution Check Procedure 3: Replacement Check Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 48: Message Check

    RTC memory (CMOS type memory) is not the same as the actual configuration or when the data is lost. If you press the F2 key as the message instructs, the SETUP screen appears to set the system configuration. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 49: Procedure 3Replacement Check

    Procedure 3 Replacement Check System board may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and replace system board with a new one. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 50: Hard Disk Drive Troubleshooting

    C. Then go to Procedure 2. heck 4 Remove the USB memory and reboot the computer. If the problem still occurs, go to Procedure 2. Otherwise, the 2.5” HDD is operating normally. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 51: Procedure 2 Message Check

    Chapter 4, Replacement Procedures for disassembling.). In sert HDD(s) to the connector(s) firmly. If it is (or they are) firmly connected, go to Procedure 3. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 52: Procedure 3 Diagnostic Test Program Execution Check

    HDC Error Seek Error Time Out Error Drive Not Ready Undefined Error Write Fault Status Error No Sense Error Other Error Table 2-5-1 HDD error code & status Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 53: Procedure 4 Connector Check And Replacement Check

    Check Check 3 Syst em b oard may be faulty. Replac e it with a n ew one following the instructions in Chapter 4, Replacement Proced ures. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 54: Keyboard Troubleshooting

    Diagnostic Program. Refer to Chapter 3, Tests and Diagnostics, for more information on how to perform the test program. If an error occurs, go to Procedure 2. If an error does not occur, keyboard is functioning properly. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 55: Procedure 2 Connector Check And Replacement Check

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 56: Touch Pad Troubleshooting

    Diagnostics, for more information on how to perform the test program. If an error occurs, go to Procedure 2. If an error does not occur, touch pad is functioning properly. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 57: Procedure 2 Connector Check And Replacement Check

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 58: Display Troubleshooting

    Insert the Diagnostics disk, turn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics for details. If an error is detected, go to Procedure 3. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 59: Procedure 3 Connector And Cable Check

    Disassemble the computer following the steps described in Chapter 4, Replacement Procedures. If the conn ection is loose, reconnect firmly and restart the computer. If the problem still occurs, go to Procedure 4 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 60: Procedure 4 Replacement Check

    Chapter 4, Replacement Procedure and test the display again. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedure. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 61: Lan Troubleshooting

    LAN cable may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 62: Wireless Lan Troubleshooting

    LAN. Perform the test following the instructions d escribed in Chapter 3. If the computer passes the test, the function is correctly working. If the computer does not pass the test, perform Procedure 2. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 63: Procedure 2 Antennas' Connection Check

    Wireless LAN card. If wireless LAN antenna cables are not connected properly, connect them firmly and perform Procedure 1. If the problem still occurs, go to the procedure 3. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 64: Procedure 3 Replacement Check

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check3 System board may be faulty. Replace it with a new one following the instructi in Chapter 4, Replacement Procedures. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 65: Sound Troubleshooting

    As the connection may be defective, disassemble the PC and check each connection. If the problem still occurs, go to Procedure 2. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 66: Procedure 2 Replacement Check

    Chapter 4. If the problem still occurs, perform Check 6. Check 6 Audio board/System board may be faulty. Replace it with a new one following the instructions in Chapter 4. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 67: Bluetooth Troubleshooting

    4. If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 68: Hdmi Troubleshooting

    Go to Procedure 3. If the external monitor appears to have the same problem as the internal monitor, system board may be faulty. Go to Procedure 2. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 69: Procedure 3Connector And Cable Check

    HDMI monitor connected to HDMI&USB board by an HDMI cable. If the connection is loose, reconnect firmly and restart the computer. If the problem still occurs, go to Procedure 4. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 70: Procedure 4Replacement Check

    HDMI&USB board may be faulty. Replace it with a new one following the instructions in Chapter 3, Replacement Procedure. Check 4 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedure. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 71: Memory Troubleshooting

    RAM may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 The slot and MB may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 72: Troubleshooting

    Check 3 If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 73 Chapter 2 Troubleshooting Procedures Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 74: Camera Troubleshooting

    Camera may be faulty. Replace it with a new one following the instruction in Chapter 4. Check 4 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 75: Microphone Troubleshooting

    CCD cable or Microphone may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructio n in Chapter 4. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 76: Crt Troubleshooting

    Chapter 4, Replacement Procedure, and then test again. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedure. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 77: Usb Troubleshooting

    Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 The system board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 78: Led Troubleshooting

    Touchpad/B may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. heck 3 The system board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 79: Chapter 3 Diagnostic Programs

    Test Program for Field. Chapter 3 Diagnostic Programs Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 80 ................3-68 3.21.2 How to Stop the Test Program ..............3-68 3.21.3 Test Status Screen ..................3-68 3.21.4 Test Stop Display ..................3-70 3.21.5 How to enter data ..................3-70 Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 81: Tests And Diagnostics Software Overview

    Test Program for Field. Tests and Diagnostics Software Overview This chapter explains how to use the Tests and Diagnostics Software for the Satellite T110 and Satellite Pro T110 computer systems. NOTES: Before starting the Tests and Diagnostics software: 1. Check all cables for loose connections.

  • Page 82: Executing The Diagnostic Test

    04.LOG UTILITIES 05.SYSTEM CONFIGURATION 06.OPTION 99.EXIT 3. To select the Diagnostic Test from the Diagnostics Menu use the arrow keys to set the highlight bar to 01 and press Enter. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 83 11. Item 88 sets the floppy disk drive and hard disk drive error retry count. Item 99 exits the submenu of the Diagnostic Test and returns to the Diagnostics Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 84 14. MEMORY2 TEST 07. REAL TIME CLOCK TEST 88. FDD&HDD ERROR RETRY COUNT SET 99. EXIT TO DIAGNOSTICS MENU Use the arrow keys to highlight the desired option and press Enter. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 85 Table 3-1 in Section 3.3 lists the function of each test on the subtest menu. Table 3-2 in Section 3.15 lists the error codes and error status for each error. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 86: Subtest Names

    80* 25 Character Display 320* 200 Graphics Display 640* 200 Graphics Display 640* 480 Graphics Display Display Page “H” Pattern Display Video DAC Register W/R/C Color Graphics Display Color Attributes Display Color Tiling Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 87 Marching Test Working Data Test HIGH RESOLUTION VRAM W/R/C Test DISPLAY TEST 640* 480 Mode Display 800* 600 Mode Display 1024* 768 Mode Display “H” Pattern Display Focus Test (“E” Pattern) Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 88 Random Read Test Read Specified Address Test 1 point W/R/C Test MEMORY2 All one/zero Test Walking 1/Walking 0 Test(Left) Walking 1/Walking 0 Test(Right) Walking 1/Walking 0 Test(Left /Right) *This test cannot support. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 89: System Test

    Device chemistry : LION design voltage : 11100 mV Manufacturer data specification information : 2.1 Manufacture date : 9/13/2005 serial no. : 32009 STATUS : INIT Press [ESC] KEY to exit Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 90 An access platform is leveling. platform. Test Fixture The Fixture which fixes PC by 90 degree inclination is used. Vibration/shock doesn't take a PCB at the time of T&D inspection. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 91 Display of a Test Program The portion which PC and Test-Fixture contact is green. Set method of PC Upper Judgment If all data is less than ranges, it will be OK. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 92 The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC Rear Uppe Judgment If all data is less than ranges, it will be OK. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 93 The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC Right Uppe Judgment If all data is less than ranges, it will be OK. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 94 The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC Front Uppe Judgment If all data is less than ranges, it will be OK. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 95 A test result is displayed when a test is completed. A display of result is O.K. or NG. And an error flag is returned at the end of a program. OK is 0. NG is 1. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 96: Memory Test

    Test data = 1H, 2H, 4H, 8H, 10H, through 80000000H. 4. Fixed data test “16 bit write/ 16 bit read” is executed and the new data is compared to the original data. Test data = FFFFFFFFH, 00000000H, 80018001H Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 97 Protected Mode [32MB - MAX] This subtest first writes data patterns and address data from 32MB to the maximum installed memory, reads the new data, and then compares the result Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 98 This subtest writes a data pattern (CCAA5533H ) in 4KB from 0 to the maximum installed memory, then waits for a memory refresh cycle (16 ms or more), reads the new data, and compares the result with the original data pattern. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 99 Stress Test This subtest writes the following 16KB data patterns to the Write/Read Buffer in conventional memory. FFFFFFFFFFFFFFFF0000000000000000 data: 5555555555555555AAAAAAAAAAAAAAAA CCCCCCCCCCCCCCCC3333333333333333 0000000000000000FFFFFFFFFFFFFFFF AAAAAAAAAAAAAAAA5555555555555555 3333333333333333CCCCCCCCCCCCCCCC FFFFFFFFFFFFFFFF0000000000000000 0000000000000000FFFFFFFFFFFFFFFF 5555555555555555AAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAA5555555555555555 CCCCCCCCCCCCCCCC3333333333333333 3333333333333333CCCCCCCCCCCCCCCC Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 100: Keyboard Test

    This subtest is used for the 86 keyboard and functions the same as Subtest 1. Subtest 03 Pressed Key Display [85 Keyboard] This subtest is used for the 85 keyboard and functions the same as Subtest 1. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 101 If left and right button short , screen will display <Left and Right Button maybe short > , the program exit . LEFT PRESS TOUCH_PAD TEST RIGHT PRESS Please Do Not Press the Left and Right Button At The Same Time Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 102: Display Test

    RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR NEXT LINE SHOWS BLINKING DISPLAY BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB BLUE MAGENTA GREEN CYAN YELLOW WHITE Press [ Enter ] KEY To exit this subtest and return to the Display Test menu: Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 103 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 104 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 105 Press ENTER to display the following sixteen colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 106 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 107 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 108 Press ENTER to display the following 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white using 640*480 video resolution. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 109 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 110 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 111 ” displays on the screen and then the screen flickers due will remain blank to the fast screen refresh while the test is executing. Press Ctrl + break to return to the Display Test menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 112 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 113 Pressing Enter executes VRAM mapping test which indicates vertical lines Press Enter to execute the VRAM mapping test which displays a horizontal line at one dot intervals using Mode 12. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 114 Press Enter to execute the VRAM mapping test which displays a vertical line at four dot intervals using Mode 12. Press [Enter] Key Press Enter to display VRAM mapping test using the all dots Mode. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 115 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 116 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 117: Floppy Disk Test

    Subtest 03 Random Address/Data This subtest writes random data to random addresses on all tracks defined in Subtest 01. The data is then read and compared to the original data. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 118 This subtest reads data from a specified track and head. The following message displays on the screen to enter the test track number and head number. TRACK NO (00~79) ?? HEAD NO (0~1) ? Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 119: Hard Disk Test

     Random Subtest 03 Random Address Data This subtest writes random data to 1000 different random addresses on the HDD. This data is then read and compared to the original data. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 120 3.18) to specify the LBA number where the error(s) occurred during Subtest 01. The following message displays on the screen to enter the test sector count. SECTOR COUNT (01~39) ?? START ADDRESS (00000000~MAX Address) ? Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 121 This subtest writes specified data to a specified sector count, then reads and compares the result. The following message displays on the screen to enter the test data, sector count. TEST DATA ????(=37b3H) SECTOR COUNT (01~39) ?? START ADDRESS (00000000~Max Address) ? Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 122: Real Time Clock Test

    If YES is selected for Test Loop on the Test Parameter menu, the screen above displays and the test is executed again. Press Ctrl + break to return to the Real Time Clock Test menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 123 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 124: Cache Memory Test

    (FFH, FEH, FEH, through 02H, 01H, 00H) is written and the new data is read and compared with the original data. The original cache memory content is then restored to the cache memory. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 125 “working data,” reads the new data and compares the result with the original data. The original cache memory content is then restored to the cache memory. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 126: High Resolution Display Test

    If YES is selected for Test Loop on the Test Parameter menu, the screen displays the colors listed above. Press Ctrl + break to return to the High Resolution Display Test menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 127 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 128 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 129 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 130 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 131 Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 132: Multimedia Test

    Move the highlight bar to the subtest you want to execute and press Enter. NOTE: Use the Toshiba Backup CD-ROM for Subtests 01, 02, and 03. Because CDROM driver issue , the Multimedia function can’t test , this is limitation .

  • Page 133: Memory2 Test

    Walking 1/Walking 0 test (Right) Tee test method is the same as Subtest2. However, the data to be used differs. 80008000800080007FFF7FFF7FFF7FFF 4000400040004000BFFFBFFFBFFFBFFF Subtest 04 Walking 1/Walking 0 test (Left/ Right) Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 134 Test Program for Field. Tee test method is the same as Subtest2. However, the data to be used differs. 7FFF7FFF7FFF7FFF8000800080008000 BFFFBFFFBFFFBFFF4000400040004000 DFFFDFFFDFFFDFFF2000200020002000 FFFBFFFBFFFBFFFB0004000400040004 FFFDFFFDFFFDFFFD0002000200020002 FFFEFFFEFFFEFFFE0001000100010001 80008000800080007FFF7FFF7FFF7FFF 4000400040004000BFFFBFFFBFFFBFFF 0004000400040004FFFBFFFBFFFBFFFB 0002000200020002FFFDFFFDFFFDFFFD 0001000100010001FFFEFFFEFFFEFFFE Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 135: Error Codes And Error Status Names

    HDC Not Reset Error Drive Not Initialized DMA Boundary Error Bad Sector Bad Track Error ECC Error ECC Recover Enabled HDC Error Seek Error Time Out Error Drive Not Ready Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 136 Caching Error Other Error Multimedia Write Error Invalid Drive Drive Not Ready Other Error NOTE: If error status name is Other Error , please reference the Error Code for error information Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 137: Running Test

    File. 7. This program is executed according to the Count Loop number selected in the Running Test Edit Item, see Section 3.20. To terminate the program, press Ctrl + Break. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 138: Dmi Infoemation

    5. OEM String ( PSP50X-XXXXX,SXXXXXXXXXX ) 6. Model Select [1]Dyn-Jpn [2]Tos-Jpn [3]Tos-Eng [4]Tos-FR 7. Write UUID ( XXXXXXXXXXXXXXXX ) 8. Brightness Write ( XXXXXXXX ) a. SLP2.0 Build Sig [1]Non OS [2]OS Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 139 It is for OEM pre install Windows and no need to Active , If you select Non OS , then you need to Active your OS before you use . Function Detail : Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 140 6. Model Select : [1]Dyn–Jpn : BIOS Logo is “dynabook” , CMOS Language is Japanese . [2]Tos-Jpn : BIOS Logo is “Toshiba” , CMOS Language is Japanese . [3]Tos-Eng : BIOS Logo is “Toshiba” , CMOS Language is English .

  • Page 141: Log Utilities

    Error Status Pass Count Subtest Number Read Data Test Name Write Data Error Count Error Name and Detail [[1:Next, 2:Prev, 3:Exit, 4;Clear, 5:FD Log Read, 6:FD Log Write, 7:Log Save]] Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 142 Test Abbreviations System Test Memory Test Keyboard Test Display Test Floppy Disk Test Hard Disk Test Real Time Clock Test Cache Memory Test Height Resolution Display Test Multimedia Test Memory2 Test Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 143: System Configuration

    * - XXXMB MEMORY SIZE * - XXX CPU * - 1 Vedio Chip XXXXXXXXXXXXX * - 1 ODD DRIVE(S):XXXXXXXX FW Rev.:XXXX Press Enter to return to the Diagnostics Menu. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 144: Function Description

    Subtest 08 Display Page Floppy Disk Test Subtest 02 Sequential W/R/C Hard Disk Test Subtest 01 Sequential Read Real Time Clock Test Subtest 02 Backup Memory Test Tab: HELP (Key Operation) Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 145 8. Select 03 from the Diagnostics Menu and press Enter to execute the Running Test. NOTE: If press Ctrl+break in the runin process, please press more one any key to exit. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 146: Common Tests And Operation

    Subtest No. Displays the Subtest number in the following format: ffgg ff = Subtest No. gg = Step Number (Will be blank if the test does not have a Step Number.) Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 147 Test Address Displays the Test Address. (The format differs for each test.) Error Status Displays the error status. Error Name Displays the name of the error. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...

  • Page 148: Test Stop Display

    Letters which must be entered are always shown in [ ]. Simultaneous entries are displayed by a “+” mark. For example: [a] [Enter] Press the “a” key, then press the [Enter] key. [Ctrl] + [c] Press the [Ctrl] key and the “c” key simultaneously. Satellite T110 and Satellite Pro T110 Tests and Diagnostics Manual...
  • Page 149 The chart shows the case for the following example:  Removing a MDC All FRUs down to the “4.2 Battery pack”to“4.8 Cover assemblies” above USB board must be removed. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 150: Safety Precautions

    4. When connecting to the AC power supply, use only an AC adapter and cable approved by Toshiba. 5. To prevent electric shock, ensure that all replacement parts are compatible with the computer and that all cables and connectors are securely connected. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 151 9. As all parts have sharp edges and corners, take care not to cut yourself. 10. After replacing an FRU, check that the computer and replaced part operate correctly. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 152: Disassembly Procedure

    Normal pin connectors are used for all other cables. Simply pull out or push in these connectors to disconnect or reconnect. Pressure plate connector Spring connector Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 153: Assembly Procedure

    One screwdriver with T6-bit TORX (for HDD slot cover)  Tweezers (for lifting screws)  ESD mats (lay on work table or floor)  An ESD wrist strap and heel grounder  Anti-static carpet or flooring Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 154: Screw Tightening Torque

    NOTE: To prevent damage to THIN HEAD screws, press along the axis of the screwdriver while turning the screw. This is because the contact area between the screw and driver is less than for a pan head screw (standard pan-shaped screw head). Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 155: Screw Notation

    B: Bind screw F: Thin head screw S: Super thin head screw T: Tapping screw U: Other screws (Unique screws: pan head, stud, etc.) Example: B6 … 6mm bind screw Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 156: Battery Pack

    4. Slide and hold the battery release latch (2) to free the battery pack after moving the battery release latch (1) into it unlock position – pick the battery pack out of the computer from fillister. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 157 NOTE: Check visually the battery terminals and clean off any dirt with a dry cloth. 1. Turn off the power of the computer. 2. Disconnect the AC adapter and all external devices from the computer. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 158 3. Attach the battery cover to the battery pack. 4. Insert the battery pack 5. Ensure the battery release latch (2) is moved into its locked position Figure 4-2-2 Install the battery pack Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 159 3. Remove the following screws securing the HDD assembly.  M2.04.0F FLAT BIND screw 4. Disconnect the HDD assembly from the connector on the HDD cable MAIN HDD Figure 4-3-1 Turn the computer upside down Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 160 Chapter 4 Replacement Procedures CAUTION: When a HDD is installed, they are installed in the position as the following figure. Screw M2×4 4pcs PULL TAB Figure 4-3-2 Remove HDD assembly Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 161 2. Connect HDD carefully to the HDD cable 3. Insert the HDD assembly with HDD cable into the HDD slot. 4. Secure the HDD assembly with the following screw.  M2.04.0F FLAT BIND screw Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 162: Memory Module

    (See Figure 4-4-1 to 4-4-2). 1. Loose the screw securing the memory slot cover. 2. Remove the memory slot cover. 3. Open the left and right latches and remove a memory module. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 163 Chapter 4 Replacement Procedures Figure 4-4-1 Remove memory slot cover Figure 4-4-2 Remove a memory module Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 164 Confirm that the new memory is detected correctly. 4. If the memory is not detected, check that it is connected correctly. Figure 4-4-3 Insert a memory module Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 165: Removing The Keyboard

    6. Insert your finger into the slot between keyboard and top cover. Then lift up the keyboard to remove it. 7. Disconnect keyboard cable. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 166 Chapter 4 Replacement Procedures Figure 4-5-1 Remove 2 screws for KB Holder Figure 4-5-2 Remove Keyboard Holder and Keyboard Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 167: Installing The Keyboard

    4. Upside down the computer and secure keyboard with the following screw.  M2.58.0F Flat BIND screw 5. Secure the KB holder with the following screw.  M2.03.0F Flat BIND screw Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 168 2. Connect the wireless LAN antenna cable to the terminals on a wireless LAN card. 3. Put the wireless LAN antenna cable on the right location from the guide. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 169: Installing A Bluetooth Module

    The following describes the procedure for installing a Bluetooth module. Connect the Bluetooth cable to the connector on the system board. Insert the Bluetooth module into the hook on the Base Assembly. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 170 Insert the 3G module card terminal slantwise into the connector on the computer and press the 3G module card into latches. Connect the 3G antenna cable to the terminals on a 3G module card. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 171: Display Assembly

    1. Close the display and turn the computer upside down. 2. Remove the battery pack (See Figure 4-2-1) 3. Remove HDD slot cover and memory slot cover Figure 4-8-1 Remove HDD slot cover Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 172 Figure 4-8-3 Remove the screws (from bottom side) 5. Disassemble KB Holder and KB (See Figure 4-5-1 to Figure 4-5-2) 6. Remove the screws from the top side and remove the cover. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 173 7. Disconnect the touch pad FFC/LAN FFC/Power FFC from the connector on the system board. Figure 4-8-5 Disconnect the touch pad FFC/LAN FFC/Power FFC 8. Disassembly TOP Cover Assembly. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 174 12. Pull out the LCD cables from the guide of system board. Figure 4-8-7 Remove the LCD cable from system board 13. Remove the DC-IN connector from the base assembly. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 175 M2.0 4F FLAT BIND screw Figure 4-8-8 Remove the hinge screws 15. Remove the display assembly with two hands holding from the base assembly. Figure 4-8-9 Remove the display assembly Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 176: Installing The Display Assembly

    Figure 4-8-10 Secure the hinge screws NOTE: Be sure to apply the locktight to the screws instructed in the figure above. 3. Connect the LCD harness to the connector on the system board. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 177 4. Put the DC-IN connector to the base assembly. 5. Arrange the wireless antenna cables and 3G antenna cables along the guide Figure 4-8-12 Arrange and connect Wireless LAN cable and 3G Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 178 9. Install Top Cover Assembly of the system. NOTE: If Fingerprint or Dust left on LCD screen during disassembly and assembly LCD units, please follow Appendix A to clean it. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 179: Top Cover Assembly

    FLAT BIND screw  M2.06F FLAT BIND screw  M2.58F FLAT BIND screw Figure 4-9-1 Remove the screws (back) 3. Disassemble KB Holder and KB (See Figure 4-5-1 to Figure 4-5-2) Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 180 Figure 4-9-2 Remove the screws (front) and top cover assembly 5. Disconnect the touch pad FFC/LAN FFC/Power FFC from the connector on the system board. Figure 4-9-3 Disconnect the touch pad FFC/LAN FFC/Power FFC Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 181 6. Disconnect the Power FFC from the connector on the Power board. Remove the following screws securing the Power Board from the bottom of Cover Assembly. Figure 4-9-4 Remove the screws and Power FFC from the Power Board Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 182 6. Secure the cover assembly with the following screws from the back and bottom of computer.  M2.02F FLAT BIND screw  M2.03F FLAT BIND screw  M2.04F FLAT BIND screw  M2.06F FLAT BIND screw  M2.58F FLAT BIND screw Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 183: Touch Pad

    3. Remove the touch pad board and touch pad plate, disconnect the touch pad FFC from the connector on the touch pad. 4. Peel off and remove the touch pad from the top cover assembly. Figure 4-10-1 Remove the touch FFC cable Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 184 Chapter 4 Replacement Procedures Figure 4-10-2 Remove the screws Figure 4-10-3 Remove the touchpad and touchpad board Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)

  • Page 185: Installing The Touch Pad

    4. Install the touch pad plate and the touch pad board, secure it with the following screws.  M2.0x2F FLAT BIND screw 5. Connect the touch pad FFC and the touch pad board FFC to the connector on the touch pad board. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 186 Audio board and LAN board) 3. Disconnect the CRT cable, Speaker cable from I/O boards’ connectors. Figure 4-11-1 Positions of I/O boards  M2.0x3F FLAT BIND screw  M2.0x4F FLAT BIND screw Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 187 2. Fix the below screws then incline insert in I/O Boards(CRT board, HDMI board, Audio board and LAN board)  M2.0x3F FLAT BIND screw  M2.0x4F FLAT BIND screw NOTE: Be careful not to catch the cables between cover assembly and base assembly. Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
  • Page 188 2. Remove the following screws securing the system board and remove the system board.  M2.03.0F FLAT BIND screw 3. Disconnect the RGB cable and DC-IN cable from the connector on the system board. Figure 4-12-1 Remove the system board Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 189 3. Connect the LAN BOARD FFC, LCD CABLE, Antenna cable, Audio board FFC, HDMI FFC, Bluetooth cable, SIM CARD FFC, TP board FFC, Power Board FFC, HDD cable to the connector on the system board. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 190 1. Pull the away the socket of RTC battery and use a clamp to hold RTC battery tightly. 2. Rotate battery through the way then remove it. Figure 4-12-2 Remove the RTC battery-step_1 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 191 Chapter 4 Replacement Procedures Figure 4-12-3 Remove the RTC battery-step_2 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 192 The following describes the procedure for installing the RTC battery unit (See Figure 4-12-4). 1. Press the force vertically then lock the RTC battery tightly. Figure 4-12-4 Install the RTC battery Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 193 NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse order of the number marked on the holder. Figure 4-13-1 Remove the CPU heat sink Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 194 Secure the following screws securing the heat sink holder along 1 to 3.  M2.03.0F FLAT BIND screw Connect the Heat sink cable from the connector on the system board Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 195: Lcd Unit

    Figure 4-14-1 Remove the display mask 4. Remove the following screws securing the LCD unit, and disconnect CCD FPC  M2.03.0F FLAT BIND screw Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 196 Chapter 4 Replacement Procedures Figure 4-14-2 Remove screws securing the LCD 5. Remove the LCD unit, the hinge and the LCD Harness from the bottom side Figure 4-14-3 Remove the LCD Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 197 7. Remove the following screws securing the LCD support (LCD unit side) and remove the hinge from the LCD unit.  M2.02.5F FLAT BIND screw Figure 4-14-5 Remove the LCD hinge Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 198 5. Cover screws with Screw MYLAR cover x4 NOTE: When installing the display mask, make sure there is no gap between the display mask and the display cover. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 199 Peel off the glue of Web Camera module. Peel off the glue of Web Camera module. Figure 4-15-1 Remove EMI tape on the web camera module Figure 4-15-2 Remove the connector of Web Camera module Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 200 The following describes the procedure for installing the Web Camera module. 1. Connect the connector of Web Camera module. 2. Pull in the glue of Web Camera Module. 3. Install the EMI tape on the web camera module. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 201 For Flatiron mini thermal grease on North Bridge and CPU Figure 4-16-1 Intel &AMD Thermal grease on North Bridge and CPU A000018310 THERMAL GREASE FCR-AS A000063980 THERMAL GREASE 7762 Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 202 Chapter 4 Replacement Procedures II. Use grease on North Bridge and CPU 0.15cc for one repair. Figure 4-16-2 Apply silicon grease for North Bridge and CPU Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 203 Remove the following screws securing Speaker Box.  M2.03F FLAT BIND screw Remove the Speaker Box. Figure 4-17-1 Remove the securing screws at left side. Figure 4-17-2 Remove the securing screws at right side Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 204 Figure 4-17-3 Remove the Speaker Box. Installing Speaker Box The following describes the procedure for installing Speaker Box. Install the Speaker Box. Secure Speaker Box of following screws.  M2.03F FLAT BIND screw Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 205: Hdd Cable

    2. Pull out HDD cable from the direction as below picture showed. Figure 4-18-1 Remove the HDD cable. Installing HDD cable The following describes the procedure for installing HDD cable. Install the HDD cable. Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 206: Replacement Procedures

    Chapter 4 Replacement Procedures Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 207 Web Camera Module ....................51 4.16 Application for Thermal grease on CPU and North Bridge ........53 4.17 Speaker Box ........................ 55 4.18 HDD cable ........................ 57 Satellite T110 / Sa tellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 208 Disconnect the touch pad FFC/LAN FFC/Power FFC ........ 32 Figure 4-9-4 Remove the screws and Power FFC from the Power Board......33 Figure 4-10-1 Remove the touch FFC cable................ 35 Satellite T110 / Sa tellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 209 Figure 4-17-1 Remove the securing screws at left side ............55 Figure 4-17-2 Remove the securing screws at right side............. 55 Figure 4-17-3 Remove the Speaker Box................56 Figure 4-18-1 Remove the HDD cable ................57 Satellite T110 / Sa tellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 210 Appendices Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 211 CN12 Bluetooth Connectors ................6 C.12 CN14 Battery Connectors ................7 C.13 CN15 FAN Connectors..................7 C.14 CN16 CRT Connector..................7 C.15 CN19 DDR Connectors ................... 8 C.16 CN20 DDR Connectors ..................12 Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 212 Turkish (TR) Keyboard .................. 11 E.22 Turkish F (TF-F) Keyboard................11 E.23 Swedish (SD) Keyboard ................. 12 E.24 Belgian_Flemish (BE) Keyboard ..............12 E.25 Yugoslavian (YU) Keyboard................13 E.26 Norwegian (NW) Keyboard ................13 Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 213 E.27 Scandinavian (ND) Keyboard ................. 14 E.28 Romanian(RM) Keyboard ................14 E.29 Frence_Canadian(Acnor) Keyboard..............15 E.30 Japanese (JP) Keyboard................... 15 E.31 Bulgarian Keyboard..................16 E.32 Taiwan(TW) Keyboard ................... 16 Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 214 Appendix F Wiring Diagrams..................F-1 RGB Monitor ID Wraparound Connector ............ F-1 LAN Loopbak Connector ................F-1 Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)

  • Page 215: Appendix A Handling The Lcd Module

    LCD cover before securing the module with screws. Do not force the module into place, because stress can affect its performance. Also, the panel’s polarized surface is easily scarred, so be careful when handling it. Satellite T110 / Satellite Pro T110 /PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 216 Be sure to quickly wipe off any liquid with cloth or ionic 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. Satellite T110 / Satellite Pro T110 /PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 217 Handling the LCD Module 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. Satellite T110 / Satellite Pro T110 /PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 218 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. 9. Do not disassemble the LCD module. Disassembly can cause malfunctions. Satellite T110 / Satellite Pro T110 /PORTEGE T110 Maintenance Manual (960-Q08)
  • Page 219 10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization. Satellite T110 / Satellite Pro T110 /PORTEGE T110 Maintenance Manual (960-Q08)

  • Page 220: Appendix B Board Layout

    Board Layout Appendix B Appendix B Board Layout B.1 System Board Figure B-1-1 System board layout (front) Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 221 Board Layout Figure B-1-2 System board layout (Back) Location Function (01) LVDS CONN (02) POWER BOARD CONN (03) KB CONN (04) LAN CONN (05) SATA HDD CONN Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 222 CN19 DDR CONN (19) CN20 DDR CONN (20) CN21 3G CONN (21) CN22 WLAN CONN (22) (24) South Bridge (25) (26) CLOCK GEN Table B-1-3 System board ICs and connectors Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)

  • Page 223: Touch Pad Board

    Location Function (01) Mouse Button Left key (02) Mouse Button Right key (03) HALL Sensor Table B-2-2 Touch Pad board connectors <Back layout> Figure B-2-3 Touch Pad board layout (Back) Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 224 Bridge Media LED (06) LED6 W-LAN LED (07) LED7 WiMAX/3G LED (08) TP Board to TP Module CONN (09) TP Board to M/B CONN Table B-2-4 Touch Pad board connectors Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)

  • Page 225: Crt Board

    B.3 CRT Board <Front layout> Figure B-3-1 Finger Print Board layout (Front) Location Function CRT ESD protection, level-shifting ,sync impedance (01) matching IC (02) CRT CONN Table B-3-2 CRT Board connectors Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 226 Board Layout <Back layout> Figure B-3-3 CRT Board layout (Back) Location Function (01) CRT to M/B CONN Table B-3-4 Finger Print Board connectors Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)

  • Page 227: Power Board

    Board Layout B.4 Power Board <Front layout> Figure B-4-1 Power Board layout (Front) Location Function (01) Power SW (02) LED1 Power LED Table B-4-2 Power Board connectors Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 228 Board Layout <Back layout> Figure B-4-3 Power Board layout (Back) Location Function (01) Power/B to M/B CONN Table B-4-4 Power Board connectors Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 229 Board Layout B.5 SIM (3G) Board <Front layout> Figure B-5-1 SIM (3G) Board layout (Front) Location Function (01) SIM(3G)/B to M/B CONN Table B-5-2 SIM (3G) Board connectors Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 230 Board Layout <Back layout> Figure B-5-3 SIM (3G) Board layout (Back) Location Function (01) JSIM1 SIM Card CONN Table B-5-4 SIM (3G) Board connectors Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)

  • Page 231: Hdmi Board

    Figure B-6-1 HDMI Board layout (Front) Location Function (01) HDMI CONN (02) HDMI/B to M/B CONN (03) USB CONN (04) 5 IN 1 Card Reader CONN Table B-6-2 HDMI Board connectors Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 232 Board Layout <Back layout> Figure B-6-3 HDMI Board layout (Front) Location Function (01) HDMI LEVEL SHIFT IC (02) Card Reader IC Table B-6-4 HDMI Board connectors Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 233 Location Function (01) USB CONN (02) USB CONN (03) Inner Speaker CONN (04) Earphone CONN (05) ADO_USB Board to M/B CONN (06) External MIC CONN Table B-7-2 ADO_USB Board connectors Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 234 Board Layout <Back layout> Figure B-7-3 ADO_USB Board layout (Back) Location Function (01) Codec IC Table B-7-4 ADO_USB Board IC Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)

  • Page 235: Lan Board

    B.8 LAN Board <Front layout> Figure B-8-1 LAN Board layout (Front) Location Function (01) RJ45 CONN (02) LAN Board to M/B CONN (03) LAN Transformer Table B-8-1 LAN Board IC and connectors Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)
  • Page 236 Board Layout <Back layout> Figure B-8-2 LAN Board layout (Back) Satellite T110 / Satellite ProT110 /PROTEGE T110 Maintenance Manual (960-Q08)

  • Page 237: Appendix C Pin Assignment

    USBP3-_LCD USBP3+_LCD LCD_DDCCLK LCD_DDCDAT INT_TXLCLKOUT- INT_TXLCLKOUT+ INT_TXOUT2- INT_TXOUT2+ INT_TXOUT1- INT_TXOUT1+ INT_TXOUT0- INT_TXOUT0+ LVDS_VADJ DISPON Power Board Connector PIN No. Signal name PIN No. Signal name +3VPCU NBSWON# PWRLED# Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 238: Cn3 Keyboard Connectors

    MY16 MX17 K_LED_P MY14 MY13 MY10 MY11 MY12 MY15 K_LED_P CAPSLED FN_F10 NUMLED LAN Connector PIN No. Signal name PIN No. Signal name AVDD_CEN TX1P TX1N TX0P TX0N Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 239: Cn5 Sata Hdd Connectors

    Pin Assignment CN5 SATA HDD Connectors PIN No. Signal name PIN No. Signal name SATA_TXP0 SATA_TXN0 SATA_RXN0 SATA_RXP0 Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 240: Cn6 Touchpad Connectors

    3G_WIMAX_LED# --- RF_LED SATA_LED#_C BAT_SAT1 BAT_SAT0 SUSLED_EC PWERLED# ACIN +3VPCU NUMLED FN_F10 3G Connector PIN No. Signal name PIN No. Signal name UIM_CLK UIM_DATA UIM_RST UIM_VPP UIM_PWR USBP7+ USBP7- Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 241: Cn9 Audio Usb Board Connectors

    INT_MIC_R AMP_MUTE# PCBEEP USBOC#0_1 USBP0+ USBP0- USBP1+ USBP1- USB_EN#0_1 +1.5V +5VPCU +5VPCU +5VPCU +5VPCU +5VPCU CN10 RTC Battery Connectors PIN No. Signal name PIN No. Signal name RTC_NO2 Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 242: Cn11 Hdmi Connectors

    SDVO_CTRLDATA SDVO_CTRLCLK O TMDSB_CLK# TMDSB_CLK TMDSB_DATA0# TMDSB_DATA0 TMDSB_DATA2# TMDSB_DATA2 TMDSB_DATA1# TMDSB_DATA1 C.11 CN12 Bluetooth Connectors PIN No. Signal name PIN No. Signal name USBP2+ USBP2- WCS_CLK BT_RESET WCS_DAT Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 243: Cn14 Battery Connectors

    PIN No. Signal name PIN No. Signal name TH_FAN_POWER1 FANSIG C.14 CN16 CRT Connector PIN No. Signal name PIN No. Signal name CRT_DDCDAT CRT_VSYNC CRT_DDCCLK CRT_HSYNC RED_L GREEN_L BLUE_L Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 244: Cn19 Ddr Connectors

    M_B_DQ0 M_B_DQ5 M_B_DQ1 M_B_DQS#0 M_B_DM0 M_B_DQS0 M_B_DQ7 M_B_DQ3 M_B_DQ6 M_B_DQ2 M_B_DQ13 M_B_DQ12 M_B_DQ9 M_B_DQ8 M_B_DQS#1 M_B_DM1 M_B_DQS1 DDR3_DRAMRS M_B_DQ11 M_B_DQ14 M_B_DQ10 M_B_DQ15 M_B_DQ16 M_B_DQ20 M_B_DQ21 M_B_DQ17 M_B_DQS#2 M_B_DM2 Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 245 M_B_DM3 M_B_DQS3 M_B_DQ26 M_B_DQ30 M_B_DQ27 M_B_DQ31 M_CKE2 M_CKE3 +1.5VSUS +1.5VSUS M_B_BS#2 M_B_A14 +1.5VSUS +1.5VSUS M_B_A12 M_B_A11 M_B_A9 M_B_A7 +1.5VSUS +1.5VSUS M_B_A8 M_B_A6 M_B_A5 M_B_A4 +1.5VSUS +1.5VSUS M_B_A3 M_B_A2 Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 246 M_B_RAS# +1.5VSUS +1.5VSUS M_B_WE# M_CS#2 M_B_CAS# M_ODT2 +1.5VSUS +1.5VSUS M_B_A13 M_ODT3 M_CS#3 +1.5VSUS +1.5VSUS SMDDR_VREF_ DIMM M_B_DQ32 M_B_DQ36 M_B_DQ37 M_B_DQ33 M_B_DQS#4 M_B_DM4 M_B_DQS4 M_B_DQ38 M_B_DQ34 M_B_DQ39 M_B_DQ35 M_B_DQ44 Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 247 M_B_DM5 M_B_DQS5 M_B_DQ43 M_B_DQ46 M_B_DQ47 M_B_DQ42 M_B_DQ53 M_B_DQ50 M_B_DQ52 M_B_DQ48 M_B_DQS#6 M_B_DM6 M_B_DQS6 M_B_DQ51 M_B_DQ51 M_B_DQ55 M_B_DQ49 M_B_DQ59 M_B_DQ56 M_B_DQ61 M_B_DQ57 M_B_DQS#7 M_B_DM7 M_B_DQS7 M_B_DQ60 M_B_DQ58 M_B_DQ62 M_B_DQ63 Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 248: Cn20 Ddr Connectors

    PIN No. Signal name SMDDR_VREF_DIMM M_A_DQ4 M_A_DQ0 M_A_DQ7 M_A_DQ5 M_A_DQS#0 M_A_DM0 M_A_DQS0 M_A_DQ3 M_A_DQ1 M_A_DQ6 M_A_DQ2 M_A_DQ10 M_A_DQ15 M_A_DQ8 M_A_DQ13 M_A_DQS#1 M_A_DM1 M_A_DQS1 DDR3_DRAMRS M_A_DQ9 M_A_DQ14 M_A_DQ10 M_A_DQ11 Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 249 M_A_DQS2 M_A_DQ20 M_A_DQ22 M_A_DQ19 M_A_DQ16 M_A_DQ26 M_A_DQ24 M_A_DQ29 M_A_DQ31 M_A_DQS#3 M_A_DM3 M_A_DQS3 M_A_DQ28 M_A_DQ27 M_A_DQ25 M_A_DQ30 M_CKE2 M_CKE3 +1.5VSUS +1.5VSUS M_A_BS#2 M_A_A14 +1.5VSUS +1.5VSUS M_A_A12 M_A_A11 M_A_A9 M_A_A7 Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 250 +1.5VSUS +1.5VSUS ---- M_A_A13 M_A_BS#1 M_A_BS#0 M_A_RAS# +1.5VSUS +1.5VSUS M_A_WE# M_CS#0 M_A_CAS# M_ODT0 +1.5VSUS +1.5VSUS M_A_A13 M_ODT1 M_CS#1 +1.5VSUS +1.5VSUS SMDDR_VREF_ DIMM M_A_DQ32 M_A_DQ34 M_A_DQ37 M_A_DQ39 M_A_DQS#4 M_A_DM4 Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 251 M_A_DQ35 M_A_DQ47 M_A_DQ41 M_A_DQ45 M_A_DQ40 M_A_DQS#5 M_A_DM5 M_A_DQS5 M_A_DQ42 M_A_DQ44 M_A_DQ43 M_A_DQ46 M_A_DQ49 M_A_DQ50 M_A_DQ55 M_A_DQ53 M_A_DQS#6 M_A_DM6 M_A_DQS6 M_A_DQ48 M_A_DQ51 M_A_DQ55 M_A_DQ54 M_A_DQ57 M_A_DQ63 M_A_DQ60 M_A_DQ56 M_A_DQS#7 Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 252: Cn21 3G Connectors

    +SMDDR_VTERM +SMDDR_VTER C.17 CN21 3G Connectors PIN No. Signal name PIN No. Signal name 3G_WAKE# +1.5V_3G UIM_PWR UIM_DATA CLK_PCIE_3G# UIM_CLK CLK_PCIE_3G UIM_RST UIM_VPP 3G_EN PLTRST# PCIE_RXN3 +3V_3G PCIE_RXP3 Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 253: Cn22 Wlan Connectors

    CPUSB# +3V_3G 3G_LED# +1.5V_3G +3V_3G C.18 CN22 WLAN Connectors PIN No. Signal name PIN No. Signal name WLAN_WAKE# WCS_DAT WCS_CLK +1.5V LAD0_PCIE LAD1_PCIE CLK_PCIE_MINI1# LAD2_PCIE CLK_PCIE_MINI1 LAD3_PCIE LFRAME#_PCIE Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 254 Pin Assignment RF_EN PLTRST# PCIE_RXN6 +3V_S5 PCIE_RXP6 +1.5V WL_SMCLK PCIE_TXN6 WL_SMDATA PCIE_TXP6 USBP10- USBP10+ WIMAX_P WIMAX_P WIMAX_LED# CL_CLK1_WLAN PLTRST#_PCIE +1.5V CL_RST#1_WLAN WIMAX_P Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 255: Appendixd Display Codes

    Display Codes Code set 1 Code set 2 Keytop Note Make Break Make Break ‘ ~ 7 & BkSp Table D-1-1 Scan codes (set 1 and set 2) (1/4) Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 256 Make Break Make Break Caps Lock ‘ “ Enter Shift (L) No.102 , < . > Shift (R) Table D-1-1 Scan codes (set 1 and set 2) (2/4) Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 257 Make Break Make Break Ctrl Alt (L) Space ALT (R)  Home   PgUp PgDn   Table D-1-1 Scan codes (set 1 and set 2) (3/4) Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 258 5. * This key corresponds to key No. 42 in a 102-key model. 6. * Refer to Table D-6, No. 124 key scan code. 7. * Refer to Table D-7, No. 126 key scan code. Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 259 With right Shift Set 1 E0 AA __________ E0 B6 E0 2A ___________ E0 36 Set 2 E0 F0 12 ________ E0 F0 59 E0 12 ___________ E0 59 Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 260 Table D-1-3 Scan codes in Numlock mode Code set 1 Code set 2 Keytop Make Break Make Break CTRL LALT ARROW NUMERIC Scrl Table D-1-4 Scan codes with Fn key Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 261 Table D-1-5 Scan codes in overlay mode Code set 1 Code set 2 Shift Make Break Make Break Prt Sc Common Ctrl  Shift  Alt  Table D-1-6 No.124 key scan code Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)
  • Page 262 Code set 2 Make Make Pause Common* E1 1D E1 F0 Ctrl* E0 46 7E E0 F0 Table D-1-7 No.126 key scan code *: This key generates only make codes. Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 263: Appendix E Keyboard Layout

    Appendix E Keyboard Layout E.1 United Status (US) Keyboard Figure US keyboard E.2 Thai (TI) Keyboard Figure TI keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 264: Korean (Ko) Keyboard

    E.3 Korean (KO) Keyboard Figure KO keyboard United Kingdom (UK) Keyboard Figure UK keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 265: Us International (Ui) Keyboard

    E.5 US International (UI) Keyboard Figure UI keyboard E.6 Hebrew (HB) Keyboard Figure HB keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 266: Danish (Dm) Keyboard

    E.7 Danish (DM) Keyboard Figure DM keyboard E.8 Swiss (SW) Keyboard Figure SW keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 267: Arabic (Are) Keyboard

    E.9 Arabic (ARE) Keyboard Figure ARE keyboard E.10 Czech (CZ) Keyboard Figure CZ keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 268: Russian (Ru) Keyboard

    E.11 Russian (RU) Keyboard Figure RU keyboard E.12 Portuguese (PO) Keyboard Figure PO keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 269: Slovakian (Sl) Keyboard

    E.13 Slovakian (SL) Keyboard Figure SL keyboard E.14 Italian (IT) Keyboard Figure IT keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 270: French (Fr) Keyboard

    E.15 French (FR) Keyboard Figure FR keyboard E.16 German (GR) Keyboard Figure GR keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 271: Greek (Gk) Keyboard

    E.17 Greek (GK) Keyboard Figure GK keyboard E.18 French_Canadian (Bilingual) Keyboard Figure F(BI) keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 272: Hungarian (Hg) Keyboard

    E.19 Hungarian (HG) Keyboard Figure HG keyboard E.20 Spanish (SP) Keyboard Figure SP keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 273: Turkish (Tr) Keyboard

    E.21 Turkish (TR) Keyboard Figure TR keyboard E.22 Turkish F (TF-F) Keyboard Figure TF-F keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 274: Swedish (Sd) Keyboard

    E.23 Swedish (SD) Keyboard Figure SD keyboard E.24 Belgian_Flemish (BE) Keyboard Figure BE keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 275: Yugoslavian (Yu) Keyboard

    E.25 Yugoslavian (YU) Keyboard Figure YU keyboard E.26 Norwegian (NW) Keyboard Figure NW keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 276: Scandinavian (Nd) Keyboard

    E.27 Scandinavian (ND) Keyboard Figure ND keyboard E.28 Romanian(RM) Keyboard Figure RM keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 277: Frence_Canadian(Acnor) Keyboard

    E.29 Frence_Canadian(Acnor) Keyboard Figure Acnor keyboard E.30 Japanese (JP) Keyboard Figure JP Keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 278: Bulgarian Keyboard

    E.31 Bulgarian Keyboard Figure Keyboard E.32 Taiwan(TW) Keyboard Figure TW Keyboard Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

  • Page 279: Appendix F Wiring Diagrams

    Figure F-1-1 RGB Monitor ID Wraparound connector (15PIN to 15PIN) LAN Loopback Connector (1) BIBAP ‘(TX+) (3) BIDBP (RX+) (2) BIDAN (TX-) (4) BIDBN (RX-) Figure F-2-1 LAN loopback connector Satellite T110 / Satellite Pro T110 / PROTÉGÉ T110 Maintenance Manual (960-Q08)

This manual is also suitable for:

Portege t110Satellite prot110

Table of Contents