Toshiba TECRA R10 Maintenance Manual page 210

3 Tests and Diagnostics
NOTE: CD-ROM refers to a DVD Super Multi drive.
(b) HDD Priority
Use this option to set the booting priority from HDD or USB (USB Memory
stick).
Built-in HDD→ USB (Default)
USB →Built-in HDD
6. Others
Whether or not you need to configure the computer with these options depends
primarily on the kind of software or peripherals you use.
(a) Core-Multi Processing
The Core Multi-Processing sets the CPU operating mode.
The configuration for the Core Multi - Processing is carried out in the BIOS
setup program.
Enabled is Dual Core mode.
Disabled is Single Core mode.
Enabled
Disabled
(b) Dynamic CPU Frequency mode
Use this option to choose a setting from the followings.
Dynamically Switchable
Always High
Always Low
3-88 [CONFIDENTIAL]
Enables Core Multi-Processing functions. (Default)
Disables Core Multi - Processing functions.
®
Enables Intel Core TM
SpeedStep technology. (Default)
®
Disables Intel Core TM
SpeedStep technology and always runs the processor at
its maximum speed.
®
Disables Intel Core TM
SpeedStep technology and always runs the processor at
its default speed.
TECRA R10 Maintenance Manual (960-708)
3.32 SETUP
Duo processor featuring Intel
Duo processor featuring Intel
Duo processor featuring Intel