Replacement Procedures
4.10 Bluetooth / Wireless LAN Card
Remove the Bluetooth / Wireless LAN Card
CAUTION: Do not touch the module card terminals. Any dirt on the terminals may
cause performance problems.
Never press hard or bend on a module card.
The following describes the procedure for removing a Bluetooth and Wireless LAN combo
card. (See Figure 4-10-1)
1. Turn off the computer and remove the battery.
2. Do the procedure from section 4.2 to section 4.8. (Except section 4.6)
3. Release the following screws securing the combo card.
4. Disconnect wireless antenna cable from the connectors on the combo card.
5. Withdraw the module card toward the arrow direction.
M2.0×3.0 Screw
Satellite L830 Maintenance Manual (960-Q08)
• M2.0×3.0-I(BKAG)(NYLOK) Screw
Figure 4-10-1 Withdraw the module card
x1
31