Toshiba TECRA R10 Maintenance Manual page 192

3 Tests and Diagnostics
To execute the subtest, input the subtest number and press Enter.
Subtest01 Communication test of 11a mode for 5100/5150 module (Two antenna type)
This subtest execute transmitting/receiving test in 802.11a mode using the
main antenna.
If a defective is not found during the test, OK message will appear in the
display. Press any key and return to the test menu.
If a defective is found during the test, NG message will appear in the display.
When pressing any key, the following message is displayed
****************************************
*
* 11a Communication Test : NG !!
*
*
****************************************
Press any key and return to the test menu.
Subtest02 Communication test of 11b mode for 5100/5150 module (Two antenna type)
This subtest execute transmitting/receiving test in 802.11b mode using the
main antenna.
If a defective is not found during the test, OK message will appear in the
display. Press any key and return to the test menu.
If a defective is found during the test, NG message will appear in the display.
When pressing any key, the following message is displayed
****************************************
*
* 11b Communication Test : NG !!
*
*
****************************************
Press any key and return to the test menu.
3-70 [CONFIDENTIAL]
3.28 Wireless LAN Test Program on DUT PC (Intel-made)
tx=a antenna : rx = a antenna
tx=a antenna : rx = a antenna
*
*
*
*
*
*
*
*
TECRA R10 Maintenance Manual (960-708)