Sd Board - Toshiba TECRA R10 Maintenance Manual

Hide thumbs Also See for TECRA R10:

Table of Contents

4.20 SD board

Removing the SD board

To remove the SD board, follow the steps below and refer to Figure 4-28.

1. Disconnect the SD BOARD FPC from the connector CN9530 on the system board.

2. Remove the following screws and SD board.

3. Disconnect SD BOARD FPC from the SD board.

TECRA R10 Maintenance Manual (960-708)

M2.5x4C FLAT HEAD

SD BOARD FPC

Figure 4-28 Removing the SD board

4 Replacement Procedure

[CONFIDENTIAL]

Show Quick Links

Table of Contents