Toshiba TECRA R10 Maintenance Manual page 172

Hide thumbs Also See for TECRA R10:
Table of Contents

Advertisement

3 Tests and Diagnostics
Subtest A
E2PROM (Internal MAC)
It checks whether the MAC address..
Subtest B
Intel AMT
It checks whether the Intel AMT corde versions information are written.
Intel Kedron
BIOS should be
Subtest C
Intel Shirley Peak (MAC)
The functional check of
out.
Subtest D
SD Card (R5C833 Writh/Read)
The functional check of SD Card.
Enter the E key and insert an SD card.
Pressing any key will start the test.
If the test result is O.K., remove the SD card.
If it is NG, check the error message.
NOTE:SD card specifications which can be used for this test are shown below.
- Classical SD Card (V1.00) for Normal Speed (max 25MHz)
- High Speed SD Card (V1.10 optional) for High Speed (max 50MHz)
- SDHC (>= 4GB) Supported
* SDIO devices are not supported
As for the SD card specification which can be used in WINDOWS, check the
product specification.
.
3-50
[CONFIDENTIAL]
is required for an
Intel
AMT correspondence.
Intel
Shirley Peak
3.20 ONLY ONE TEST
AMT check.
and a MAC Address check are carried
TECRA R10 Maintenance Manual (960-708)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents