Table of Contents
Advertisement
5
Installation of the Smart Manager with data
analyzer
• Do not twist communication wires (used between indoor unit and outdoor unit and used for central control) and input/
output wires with power wires or bundle them together with power wires in a metal tube. Doing so may cause
malfunction.
• Install the Smart Manager with data analyzer away from a noise source.
• When noise is induced into the power supply of the Smart Manager with data analyzer, take proper measures such
as attaching of a noise filter.
Base
Panel
8.5
155
172
Central controller box
This hole is provided for penetration of the
central controller box fixing screw.
Fix the panel by hooking the nails.
8.5
5Ø
CAUTION
Insert a flat-blade screwdriver or the like into
the right and left grooves at the bottom of the
panel, and then carefully detach the panel.
Dimensions of unit fixing holes in the wall, etc.
142
12
Advertisement
Table of Contents
