Pci Expansion Slots; Onboard Controllers/Ports; Graphics Controller; Nuvoton Wpcm450R Controller - Supero FatTwin F627R2-F73 User Manual

PCI Expansion Slots

The FatTwin F627R2-F73 has for each node 1x PCI-E 3.0 x16 low-profi le slot
available for use with a riser card.

Onboard Controllers/Ports

One Fast UART 16550 serial port is located on the serverboard. The color-coded
I/O ports include a VGA (monitor) port, two USB 2.0 ports, an IPMI dedicated LAN
port and two Gigabit Ethernet ports.
Note: For IPMI Confi guration Instructions, please refer to the Embedded IPMI
Configuration User's Guide available @
manuals/.

Graphics Controller

The X9DRFF-7 features an integrated Nuvoton WPCM450R BMC Video Controller.

Nuvoton WPCM450R Controller

Note: The term "IPMI controller" and the term "BMC controller" can be used
interchangeably in this section.
The Nuvoton WPCM450R Controller, a Baseboard Management Controller (BMC),
supports 2D/VGA-compatible Graphic Cores with PCI interface, creating multi-media
virtualization via Keyboard/Video/Mouse Redirection (KVMR). The WPCM450R
Controller is ideal for remote system management.
The WPCM450R Controller interfaces with the host system via PCI connections
to communicate with the graphics cores. It supports USB 2.0 and 1.1 for remote
keyboard/mouse/virtual media emulation. It also provides LPC interface support to
control Super IO functions. The WPCM450R Controller is connected to the network
via an external Ethernet PHY module or shared NCSI connections.
The WPCM450R communicates with onboard components via six SMBus
interfaces, PECI (Platform Environment Control Interface) buses, and General
Purpose I/O ports.

WPCM450R DDR2 Memory Interface

The WPCM450R supports a 16-bit DDR2 memory module with a speed of up to 220
MHz. For best signal integrity, the WPCM450R provides point-to-point connection.
http://www.supermicro.com/support/
1-3
Chapter 1: Introduction