Wpcm450R Ddr2 Memory Interface; Wpcm450R Pci System Interface; Other Features Supported By The Wpcm Bmc Controller - Supero FatTwin F617H6-FT+ User Manual

FatTwin F617H6-FT+/FTPT+ USER'S MANUAL
The WPCM450R Controller interfaces with the host system via PCI connections
to communicate with the graphics cores. It supports USB 2.0 and 1.1 for remote
keyboard/mouse/virtual media emulation. It also provides LPC interface support to
control Super IO functions. The WPCM450R Controller is connected to the network
via an external Ethernet PHY module or shared NCSI connections.
The WPCM450R communicates with onboard components via six SMBus
interfaces, PECI (Platform Environment Control Interface) buses, and General
Purpose I/O ports.

WPCM450R DDR2 Memory Interface

The WPCM450R supports a 16-bit DDR2 memory module with a speed of up to 220
MHz. For best signal integrity, the WPCM450R provides point-to-point connection.

WPCM450R PCI System Interface

The WPCM450R provides 32-bit, 33 MHz 3.3V PCI interface, which is compliant
with the PCI Local Bus Specifi cation Rev. 2.3. The PCI system interface connects
to the onboard PCI Bridge used by the graphics controller.

Other Features Supported by the WPCM BMC Controller

The WPCM450R supports the following features:
•
IPMI 2.0
•
Serial over LAN
•
KVM over LAN
•
LAN Alerting-SNMP Trap
•
Event Log
•
X-Bus parallel interface for I/O expansion
•
Multiple ADC inputs, Analog and Digital Video outputs
•
SPI Flash Host BIOS and fi rmware bootstrap program supported
•
Reduced Media Independent Interface (RMII)
•
OS (Operating System) Independency
•
Provides remote Hardware Health Monitoring via IPMI. Key features
•
Provides Network Management Security via remote access/console redirection.
•
Supports the following Management tools: IPMIView, CLI (Command Line
Interface)
•
RMCP+ protocol supported
1-4