Call Forward Settings Section - Cisco SPA2102 Administration Manual

ATA Voice Field Reference
User page
Cisco Small Business ATA Administration Guide

Call Forward Settings section

Cfwd All Dest
Cfwd Busy Dest
Cfwd No Ans Dest
Cfwd No Ans Delay Delay in sec before Call Forward No Answer triggers.
Forward number for Call Forward All Service
In addition to normal call forward destination as used in the
other ATAs, on the SPA3102, you can specify the following
additional parameters:
gw0 – forward the caller to use the PSTN gateway
<pstn-number>@gw0 – forward to caller to the PSTN
number (dialed automatically by the SPlocalA through the
PSTN gateway)
The default is blank.
Forward number for Call Forward Busy Service. Same as
Cfwd All Dest.
The default is blank.
Forward number for Call Forward No Answer Service.
Same as Cfwd All Dest.
In addition to normal call forward destination as used in the
other ATAs, on the SPA3102, you can specify the following
additional parameters:
gw0 – forward the caller to use the PSTN gateway
<pstn-number>@gw0 – forward to caller to the PSTN
number (dialed automatically by the SPA through the PSTN
gateway)
The default is blank.
Same as Cfwd All Dest.
The default is 20.
B
217