Cisco SPA2102 Administration Manual page 58

Configuring Dial Plans
NOTE
Cisco Small Business ATA Administration Guide
Digit Sequence
(comma)
(exclamation point)
The SPA implicitly appends the vertical code sequences entered in the regional
parameter settings to the end of the dial plan. Likewise, if Enable_IP_Dialing is
enabled, then IP dialing is also accepted on the associated line.
Function
For an intersequence tone, enter a comma
between digits to play an “outside line” dial tone
after a user-entered sequence.
EXAMPLE:
An “outside line” dial tone is sounded after the
user presses 9, and the tone continues until the
user presses 1.
For number barring, enter an exclamation point to
prohibit a dial sequence pattern.
EXAMPLE:
The system rejects any 11-digit sequence that
begins with 1900.
Enter an asterisk to allow the user to enter a 2-
digit star code.
For Interdigit Timer Master Override, enter
reduce the short inter-digit timer to 0 seconds, or
enter L0 to reduce the long inter-digit timer to 0
seconds.
For a pause, enter followed by a number and a
space. The duration of the pause is the specified
number of seconds. This feature is typically used
for implementation of a hot line and warm line,
with 0 delay for the hot line and a non-zero delay
for a warm line.
EXAMPLE:
4
to
58