Mac Clone Settings Section; Remote Management Section; Qos Settings Section - Cisco SPA2102 Administration Manual

ATA Routing Field Reference
WAN Status page
Cisco Small Business ATA Administration Guide

MAC Clone Settings section

A MAC address is a 12-digit code assigned to a unique piece of hardware for
identification, like a social security number. Some ISPs require you to register a
MAC address in order to access the Internet. If you do not wish to re-register the
MAC address with your ISP, you may assign the MAC address you have currently
registered with your ISP to the router with the MAC Address Clone feature.
Enable MAC Clone
Service
Cloned MAC Address

Remote Management section

Enable WAN Web
Server
WAN Web Server Port

QOS Settings section

Use Quality of Service (QoS) to assign different priority levels to different types of
data transmissions.
QOS Policy
QOS QDisc
To use MAC Address cloning, select Yes. Default is No.
Use when your ISP requires a certain MAC address. It’s
usually the address for your PC.
Allows or prevents access to the administration web
server from a computer that is not directly connected to
the ATA device. Options are Yes or No. The default
value is Yes.
The port that is used for WAN access to the ATA device.
The default value is 80.
Enable when you want to use QoS. Options are: Always
On or On when Phone is Use (default).
Allow QoS Queuing. Options are None or TBF (token
bucket filter). Information can be found at about TBF at:
http://lartc.org/howto/lartc.qdisc.classless.html
A
105