Chapter 2: Basic Administration And Configuration; Basic Services And Equipment Required - Cisco SPA2102 Administration Manual

Basic Administration and Configuration

Basic Services and Equipment Required

Cisco Small Business ATA Administration Guide
This chapter describes the equipment and services that are required to install
your ATA device and explains how to complete the basic administration and
configuration tasks.
Refer to the following topics:
• “Basic Services and Equipment Required” section on page 31
• “Downloading Firmware” section on page 32
• “Basic Installation and Configuration” section on page 32
• “Upgrading the Firmware for the ATA Device” section on page 32
• “Setting up Your ATA Device” section on page 33
• “Using the Administration Web Server” section on page 34
• “Upgrading, Rebooting, and Resyncing Your ATA Device” section on
page 38
• “Provisioning Your ATA Device” section on page 40
To configure your ATA devices, you need the following services and equipment:
• An integrated access device or modem for broadband access to the Internet
• Internet Telephony Service Provider (ITSP) for Voice Over IP Telephone service
• You must have to following information about your account:
• SIP Proxy (IP address or name)
• Account information and Password
2
31