Voip Users And Passwords (Http Authentication) Section - Cisco SPA2102 Administration Manual

ATA Voice Field Reference
PSTN Line page (SPA3102)
Cisco Small Business ATA Administration Guide

VoIP Users and Passwords (HTTP Authentication) section

VoIP User 1/2/3/4/
5/6/7/8 Auth ID
VoIP User 1/2/3/4/
5/6/7/8 DP
VoIP User 1/2/3/4/
5/6/7/8 Password
The first of 8 user-id’s that a VoIP Caller can use to
authenticate itself to the SPA using the HTTP Digest
method (in other words, by embedding an Authorization
header in the SIP INVITE message sent to the SPA. If the
credentials are missing or incorrect, the SPA will challenge
the caller with a 401 response). The VoIP caller whose
authentication user-id equals to this ID is referred to VoIP
User 1 of this SPA.
NOTE: If the caller specifies an authentication user-id that
does not match any of the VoIP User Auth ID’s, the INVITE
will be rejected with a 403 response.
The default is blank.
Index of the dial plan in the dial plan pool to be used with
VoIP User 1. If Authentication is disabled, the default dial
plan is used for all unknown VoIP users.
The default is 1.
The password to be used with VoIP User 1. The user
assumes the identity of VoIP User 1 must therefore
compute the credentials using this password, or the INVITE
will be challenged with a 401 response
The default is blank.
B
208