Vertical Service Activation Codes Section - Cisco SPA2102 Administration Manual

Analog telephone adapters
Hide thumbs Also See for SPA2102:
Table of Contents

Advertisement

ATA Voice Field Reference
Regional page
Cisco Small Business ATA Administration Guide
CPC Duration

Vertical Service Activation Codes section

Vertical Service Activation Codes are automatically appended to the dial-plan.
There is no need to include them in dial-plan, although no harm is done if they are
included.
Call Return Code
Call Redial Code
Blind Transfer Code Begins a blind transfer of the current call to the extension
Call Back Act Code Starts a callback when the last outbound call is not busy.
Call Back Deact
Code
Call Back Busy Act
Code
Cfwd All Act Code
Duration in seconds for which the tip-to-ring voltage is
removed after the caller hangs up. After that, tip-to-ring
voltage is restored and dial tone applies if the attached
equipment is still off-hook. CPC is disabled if this value is
set to 0. Range: 0 to 1.000 second. Resolution is 0.001
second.
The default is 0 (CPC disabled).
This code calls the last caller.
The default is *69.
Redials the last number called. This field is not found in the
PAP2T.
The default is *07.
specified after the activation code.
The default is *98.
The default is *66.
Cancels a callback.
The default is *86.
Starts a callback when the last outbound call is busy. This
field is only found in the PAP2T.
The default is *05
Forwards all calls to the extension specified after the
activation code.
The default is *72.
B
143

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa8000Pap2tSpa8800Spa3102

Table of Contents