Call Feature Settings Section - Cisco SPA2102 Administration Manual

Analog telephone adapters
Hide thumbs Also See for SPA2102:
Table of Contents

Advertisement

ATA Voice Field Reference
Line page
Cisco Small Business ATA Administration Guide
Reply 182 On Call
Waiting
Use Anonymous
with RPID
Use Local Addr in
FROM

Call Feature Settings section

On the SPA8800, these settings are configured on the Phone pages only.
Blind Attn-Xfer
Enable
MOH Server
Conference Bridge
URL
When this feature is enabled, your ATA device replies with
a SIP 182 response to the caller if it is already in a call and
the phone is off-hook. To use this feature, select yes.
Otherwise, keep the default, no.
This field is found on the SPA2102, SPA3102, SPA8800
only.
When set to yes, use “anonymous” in the SIP message
when remote party ID is requested in the SIP message.
This field is found on the SPA2102 only.
Default is yes.
The IP address of the local address enclosed in the FROM
of the SIP message. This field is found on the SPA2102
only.
Default is no.
Enables the ATA device to perform an attended transfer
operation by ending the current call leg and performing a
blind transfer of the other call leg. If this feature is disabled,
the ATA device performs an attended transfer operation by
referring the other call leg to the current call leg while
maintaining both call legs. To use this feature, select yes.
Otherwise, select no.
The default is no.
User ID or URL of the auto-answering streaming audio
server. When only a user ID is specified, the current or
outbound proxy is contacted. Music-on-hold is disabled if
the MOH Server is not specified.
This feature supports external conference bridging for n-
way conference calls (n > 2), instead of mixing audio locally.
To use this feature, set this parameter to that of the server’s
name, for example, conf@myserver.com:12345 or conf
(which uses the Proxy value as the domain). This field is
found on the SPA2102 and PAP2T only.
B
163

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa8000Pap2tSpa8800Spa3102

Table of Contents