Cisco SPA2102 Administration Manual page 146

ATA Voice Field Reference
Regional page
Cisco Small Business ATA Administration Guide
Dist Ring Act Code
Dist Ring Deact
Code
Speed Dial Act
Code
Secure All Call Act
Code
Secure No Call Act
Code
Secure One Call
Act Code
Secure One Call
Deact Code
Conference Act
Code
Attn-Xfer Act Code If the code is specified, the user must enter it before dialing
Modem Line Toggle
Code
FAX Line Toggle
Code
Enables the distinctive ringing feature.
The default is *26
Disables the distinctive ringing feature.
The default is *46.
Assigns a speed dial number.
The default is *74.
Makes all outbound calls secure.
The default is *16.
Makes all outbound calls not secure.
The default is *17.
Makes the next outbound call secure. (It is redundant if all
outbound calls are secure by default.)
The default is *18.
Makes the next outbound call not secure. (It is redundant if
all outbound calls are not secure by default.)
The default is *19.
If this code is specified, the user must enter it before dialing
the third party for a conference call. Enter the code for a
conference call.
the third party for a call transfer. Enter the code for a call
transfer.
Toggles the line to a modem.
The default is *99. Modem pass-through mode can be
triggered only by pre-dialing this code.
Toggles the line to a fax machine. This field is not found in
the PAP2T.
The default is #99.
B
146